Toshiba TRST-56 SERIES, EO1-13016 Product Overview, Introduction, Features, Applicable Model

Page 7

1. PRODUCT OVERVIEW

EO1-13016

1.1 Introduction

1. PRODUCT OVERVIEW

1.1 Introduction

Thank you for purchasing the TOSHIBA TEC TRST-56 Series Thermal Printer. This printer is a compact line thermal printer designed to be connected to a TOSHIBA TEC POS terminal or used as a kitchen printer, etc.

It prints an 80 mm-wide receipt at the maximum print speed of 150 mm/sec. The body colour is selectable between fair white (FW-2) and stylish grey (SG) so that it is possible to coordinate the colour with the TOSHIBA TEC POS terminal. The interface type is either Serial interface (RS-232C) or Parallel interface (Centronics) according to the model type.

This manual contains general set-up and maintenance information and should be read carefully to help gain the maximum performance and life from your printer. For most queries please refer to this manual and keep it safe for future reference.

1.2 Features

Due to a paper drop-in mechanism, the paper replacement can be done by just dropping a new paper roll and closing the cover. This also makes the print head cleaning easy.

This printer prints in thermal direct method at high speed (max. 150 mm/sec.) with less noise.

As the paper outlet is provided in front of the printer, the receipt can be taken out easily, and flexible installation is possible.

Print layout can be variously arranged.

The power supply unit (AC adapter) is detachable from the printer.

A drawer interface (1 ch) is provided.

An automatic cutter is provided as standard. (Partial cut)

Two body colors are available for you to color coordinate with the TOSHIBA TEC POS terminal to be connected.

User-defined characters and logos can be registered in the flash memory.

1.3

Applicable Model

 

 

TRST-56-P-1W-QM

TRST-56-S-1W-QM

TRST-56-P-1G-QM

TRST-56-S-1G-QM

Model name description

TRST-56- - … … -QM

Destination code

QM: Standard for worldwide

Body colour

W:Fair white (FW-2)

G:Stylish grey (SG)

Power cord

1: without power cord (local purchase)

Interface type

P:Parallel interface

S:Serial interface

NOTE: Some combinations of the above specifications are not developed as products. For details, please refer to your nearest authorised TOSHIBA TEC representative.

1- 1

Image 7
Contents TRST-56 Series Page Verwittiging Wkhsoxj Request Regarding Maintenance PrecautionsTable of Contents Applicable Model FeaturesProduct Overview IntroductionAccessories Printer SpecificationsDescription Receipt Roll Front/Rear View AppearanceOperation Panel Ground terminal ConnectorsDrawer interface connector 6-pin modular connector FAC InletSET UP Procedure Setting up the Printer Connecting the Power Cord and Interface Cable Installation ProcedureSerial Interface Type Loading the Receipt Roll Connecting the DrawerAdjusting the Paper Near End Sensor Position TRST-56 Self Test PrintCleaning General MaintenanceRemoving Jammed Paper Troubleshooting Index