Toshiba EO1-13016 Connectors, Drawer interface connector 6-pin modular connector, FAC Inlet

3. APPEARANCE EO1-13016

3.3 Connectors

3.3 Connectors

CAUTION!

1.The drawer interface connector is exclusively for connecting the drawer. Do not connect a phone line or any other cables than the drawer cable to this connector. Doing so may cause a failure of the phone line and this printer.

2.To the DC24V connector (socket connector), do not connect anything other than the built-in AC adapter.

3.The built-in AC adapter is exclusively for this printer. Do not use it for any other machines.

c	d e	g
	f

c￿[Interface connector] (Serial interface model: D-SUB 25-pin Socket Connector,

Parallel interface model: IEEE 1284-B receptacle)

An interface cable which connects the printer to a POS terminal is connected to this connector. A Centronics interface cable (Parallel I/F model) or an RS-232C interface cable (Serial I/F model) is connected.

d[Drawer interface connector] (6-pin modular connector)

A drawer cable which connects the printer to a drawer is connected to this connector. To this connector, a TOSHIBA TEC drawer can be connected. Do not connect anything other than the connectable drawer.

NOTE: For the connectable drawers, refer to your nearest authorised TOSHIBA TEC representative.

e[DC24V] (Socket connector)

The built-in AC adapter supplies +24V power to the printer through this connector. Do not connect anything other than the built-in AC adapter.

f￿[AC Inlet]

The AC power cord is connected to this inlet.

g[Ground terminal]

The drawer interface cable’s ground wire is secured to this terminal.

3- 2