5. INSTALLATION PROCEDURE |
5.5 Self Test Print
5.5 Self Test Print
When the power is turned on while pressing the [FEED] button, the printer will start a self test print. After completing the self test print, the printer will automatically cut the receipt and return to the stand- by mode. (while the printer is restored, the POWER LED goes off for a moment and soon lights again.) If the [FEED] button is kept pressed while the printer is restored, the self test print will be performed again.
TRST-56
MPVX.XX
LPVX.XX
Serial Interface |
|
|
Baud Rate | : | 9600 bps |
Data Bit | : | 8 bits |
Parity | : | Odd |
Handshake : | DTR/DSR | |
Firmware Version
Loader Version
Interface Type
Communication Specification (Serial Interface model only)
Buffer Size |
|
| : |
| 4K byte | |||
Dip Switches |
|
|
|
|
| |||
|
|
|
|
| DS1 |
|
| |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
ON | o |
|
|
|
|
| o |
|
OFF |
| o o o o o |
| o | ||||
Buffer Size
|
|
|
|
|
|
|
|
|
| Dip Switch Settings |
|
|
|
| DS2 |
|
|
| (Different depending | ||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 10 | on the destination) |
| Dip Switch 3 settings | |||||||||
ON |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| are printed for the Serial | |
OFF | o | o o | o | o o o | o | o o | Interface model only) | |||
|
|
|
| DS3 |
|
|
|
| ||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
ON |
|
|
|
| o |
|
|
|
|
|
OFF | o | o o o |
| o o o |
|
| ||||
!” #$%&’ 
] ^ _ ‘abcdefghijklmnopqrstuvwxyz{}~
Printable Characters (Different depending on the destination)
5- 5