Toshiba GA-1330 manual Fitting the printed image to the paper

1

PRINTING FROM WINDOWS

Fitting the printed image to the paper

The printer driver can adjust the size of the printed image to match the size of the paper loaded in the machine.

Follow the steps shown below to use this function. The explanation below assumes that you intend to print a letter size document on invoice size paper.

☞See Basic printing for details on how to open the printer driver.

The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected.

Note ☞

Printing multiple pages on one page

1	Click the "Paper" tab in the printer driver setup
	screen.
2	Select the original size (Letter) of the print
	image in "Paper Size".
3	Check the "Fit to Page" box.
	When using the PS printer driver, select "Fit To Paper

Size" in "Zoom Setting".

4	Select the actual size of paper to be used for
	printing (Invoice).

The size of the printed image will be automatically adjusted to match the paper loaded in the machine.

Paper Size: Letter

Fit To Paper Size: Invoice

Letter size document	Invoice size paper
(Paper Size)	(Fit To Paper Size)

● If "A3 [Fit to Page]", "B4 [Fit to Page]", or "Ledger [Fit to Page]" is selected, the print image is fit to the letter size even if "Fit to

Note

Page" is not selected.

●When using the PS printer driver, the print image can be enlarged or reduced by means of numerical values. (The vertical and horizontal ratios can be set separately.) Select "XY-Zoom" in step 3, click the "Width/Length" button, and adjust the ratios in the screen that appears.

C O N T E N T S I N D E X 13