Toshiba GA-1330 manual PCL Settings, Ff=Ff

Item

Selections

Description

Symbol Set

Select one of 35 sets.

This specifies which country's characters (PCL symbol set) are assigned to

certain of the symbols in the character code list. The factory default setting is

[PC-8].

Font

Select one internal or

This specifies which PCL font to use for printing. One font can be specified from

one external font.

among the internal fonts and extended fonts (when the barcode font kit or the

Flash ROM kit is installed). The factory default setting is [0: Courier].

Line Feed Code

CR=CR; LF=LF;

This specifies the line break code by means of a combination of the "CR"

FF=FF,

(return) code, "LF" (line break) code, and "FF" (page break) code. The factory

CR=CR+LF; LF=LF;

default setting is printing based on the transmitted code. The setting can be

FF=FF,

changed by selecting one of four combinations.

CR=CR; LF=CR+LF;

FF=CR+FF,

CR=CR+LF; LF=CR+LF;

FF=CR+FF

Wide A4

Enable, Disable

This setting can be enabled to print 80 lines on A4 size paper with each line

10CPI font (English characters). When the setting is disabled (a checkmark

does not appear), each line is 78 characters long.

C O N T E N T S

I N D E X

30