2. PRINTER SETUP | ENGLISH VERSION |
2.1 Precautions
2. PRINTER SETUP
2.1 Precautions
This section outlines the steps necessary to setup your printer prior to its
operation. The section includes precautions, connecting cables, assembling accessories, loading media, and performing a test print.
To insure the best operating environment, and to assure the safety of the operator and the equipment, please observe the following precautions.
∙Operate the printer on a stable, level, operating surface in a location free from excessive humidity, high temperature, dust, vibration or direct sunlight.
∙Keep your work environment static free. Static discharges can cause damage to delicate internal components.
∙Make sure that the printer is connected to a clean source of AC Power and that no other high voltage devices that may cause line noise interference are connected to the same mains.
∙Ensure that the printer is connected only to AC mains that has a proper ground (earth) connection.
∙Do not operate the printer with the cover open. Be careful not to allow fingers or articles of clothing to get caught into any of the moving parts of the printer.
∙Make sure to turn off the printer power and to remove the power adapter connector from the printer whenever working on the inside of the printer or when cleaning the printer.
∙For best results, and longer printer life, use only TOSHIBA TEC recommended media.
∙Store the media in accordance with the specifications.
∙This printer mechanism contains high voltage components; therefore you should never remove any of the covers of the machine as you may receive an electrical shock. Additionally, the printer contains many delicate components that may be damaged if accessed by unauthorized personnel.
∙Clean the outside of the printer with a clean dry cloth or a clean cloth slightly dampened with a mild detergent solution.
∙Use caution when cleaning the thermal print head as it may become very hot while printing. Wait until it has had time to cool before cleaning. Use only the TOSHIBA TEC recommended print head cleaner to clean the print head.
∙Do not turn off the printer power or remove the power plug while the printer is printing or while the Indictor Lamp is flashing.
E2- 1