Toshiba B-SV4D-QM owner manual External Media Roll Hanger Option

2. PRINTER SETUP ENGLISH VERSION EO1-33035

2.6 Loading the Media

2.6Loading the Media (Cont.)

When a media roll has an outside diameter exceeding 127 mm (5”) or an inner core diameter of 38.1 mm (1.5”), the optional External Media Roll Hanger will be required.

1.Fit the protrusions on the bottom of the printer into the holes in the External Media Roll Hanger.

External Media Roll

Hanger (Option)

2.Load a media roll onto the printer’s Media Holder Ass’y, and place it into the cuts of the External Media Roll Hanger.

3.Pull the media forward and insert the leading edge into the printer so that it passes between the Rear Media Guides.

Media Holder

Ass’y

When the media roll has the inner core diameter of 76.2 mm (3”), use the 3”-Diameter Media Shaft included in the optional External Media Roll Hanger.

3”-Diameter Media Shaft (Option)

4.Manually move the Rear Media Guides so that the media is centred.

5.Refer to the previous pages to complete the media loading.

6.Close the Top Cover.

E2- 8