3. MAINTENANCE | ENGLISH VERSION |
3.2 Care/Handling of the Media
3.2Care/Handling of the Media
CAUTION!
Be sure to carefully review and understand the Supply Manual. Use only media which meets specified requirements. Use of non- specified media may shorten the head life and result in problems with bar code readability or print quality. All media should be handled with care to avoid any damage to the media or printer. Read the guideline in this section carefully.
∙Do not store media for longer than the manufacturer’s recommended shelf life
∙Store media rolls on the flat end. Do not store them on the curved sides as this might flatten that side causing erratic media advance and poor print quality.
∙Store the media in plastic bags and always reseal after opening. Unprotected media can get dirty and the extra abrasion from the dust and dirt particles will shorten the print head life.
∙Store the media in a cool, dry place. Avoid areas where they would be exposed to direct sunlight, high temperature, high humidity, dust or gas.
∙The thermal paper used for direct thermal printing must not have specifications which exceed Ca2+, K+, Na+ 800 ppm, and Cl- 600 ppm.
∙Some ink used on
For further information, please contact your local distributor or your media manufacturer.
E3- 3