Toshiba B-SV4D-QM owner manual Appendix 2 Interface, „Interface Cables

APPENDIX 2 INTERFACE ENGLISH VERSION EO1-33035

APPENDIX 2 INTERFACE

APPENDIX 2 INTERFACE

„￿Interface Cables

To prevent radiation and reception of electrical noise, the interface cables must meet the following requirements:

∙Fully shielded and fitted with metal or metallized connector housings.

∙Keep as short as possible.

∙Should not be bundled tightly with power cords.

∙Should not be tied to power line conduits.

„￿RS-232C Cable description

The serial data cable used to connect the printer to a host computer should be one of the following two types (9-pin or 25-pin connector):

Connector to the Host Computer

Function	9 pin	25 pin
RXD	2	3
TXD	3	2
DTR	4	20
GND	5	7
DSR	6	6
RTS	7	4
CTS	8	5

Connector to Printer

Pin No. Function

1+5V

2TXD

3RXD

4RTS

5GND

6CTS

7RTS

8CTS

9+5V

NOTE:

Use an RS-232C cable with a connector with inch type securing screws.

EA2- 1