Toshiba B-SV4D-QM owner manual Platen/Sensors, Cover

Page 21

3. MAINTENANCE	ENGLISH VERSION EO1-33035
	3.1 Cleaning

3.1.2 Platen/Sensors	1.	Wipe the Platen with a soft cloth moistened with alcohol.
	2.	Remove dust or paper particles from the Media Sensor and Cover

Open Sensor using an air blower.

Cover Open

Sensor

Media Sensor

3.1.3 Cover

CAUTION!

Do not use any volatile solvents including thinner and benzene, as this may cause discoloration or distortion of the cover.

Platen

Wipe the Cover with a dry soft cloth. Wipe off dirt with a soft cloth slightly moistened with water.

E3- 2

Image 21

Contents SV4D-QM Vorsicht CE Compliance for EU onlyWkhsoxj Wkhsoxj Table of Contents Accessories Introduction FeaturesProduct Overview UnpackingWhen purchasing the power cord Dimensions AppearanceFront View Rear View Interior Button and Indicator LampPrecautions Printer SetupProcedure before Operation Turning the PrinterTurning on the Printer Turning OFF the Printer Connecting the Cables to the PrinterConnecting the Power Adapter and the Power Cord Loading the Media Batch mode Strip mode Option ∙ How to set the mediaCut mode External Media Roll Hanger Option Self Print Test and Dump Mode Test, and Dump Mode different type UtilitiesMedia Sensor Media Sensor CalibrationPrint test label sample Maintenance CleaningPrint Head Cover Platen/SensorsCare/Handling of the Media Troubleshooting Guide TroubleshootingProblems Solutions Removing Jammed MediaAppendix 1 Specifications SpecificationsA1.1 Printer A1.3 Media A1.2 OptionsA1.3.1 Media Type Option Name Type DescriptionMedia Type A1.3.2 Detection Area of the Transmissive SensorA1.3.3 Detection Area of the Reflective Sensor Figure below shows the effective print area on the media A1.3.4 Effective Print Area„Interface Cables Appendix 2 InterfaceBar code GlossariesLAN EA1-1 IndexIndex EO1-33035