Notes
(1)If a change of label size or type of sensor, feed fine adjustment, cut position fine adjustment (or strip position fine adjustment) or back feed fine adjustment is made, one label must be fed to adjust the first print position prior to printing.
(2)The parameter of the Feed Command is protected in memory (even if the power is turned off).
(3)When “status response made” is selected in the Issue Command parameter setting, a status response is made after the end of feed or when an error occurs.
(4)For explanation about the process to stop the label at the home position, refer to the section regarding the Issue Command.
(5)If no subsequent command is received from the PC for 1 second after the last label has been fed, the printer automatically performs a
*For notes, refer to the section regarding the Issue Command.
Examples |
|
| 41.0 |
| mm |
73.2 | S a m p l e |
| |
mm |
|
| 15.0 mm |
| 82.0 mm |
Paper feed direction
76.2 mm
[ESC] D0762, 0820, 0732 [LF] [NUL]
[ESC] AX; +010, +000, +10 [LF] [NUL] [ESC] T11C40 [LF] [NUL]
[ESC] C [LF] [NUL]
[ESC] PC001; 0150, 0410, 1, 1, A, 00, B [LF] [NUL]
[ESC] RC001; Sample [LF] [NUL]
[ESC] XS; I, 0004, 0011C4001 [LF] [NUL]
- 146 -