(13)Transmission Control: XON/XOFF (DC1/DC3) Protocol READY/BUSY (DTR) Protocol
XON/XOFF (DC1/DC3) Protocol + READY/BUSY (DTR) Protocol RTS Protocol
cXON/XOFF (DC1/DC3) Protocol
z When initialized after the power is turned on, this printer becomes ready to receive data and sends an XON code (11H). (Transmission or
z The printer sends an XOFF code (13H) when the blank positions in the receive buffer are 800 bytes or less.
z The printer sends an XON code (11H) when the blank positions in the receive buffer are 2K bytes or more.
z When there are no blank positions in the receive buffer, the printer discards data received exceeding the receive buffer capacity, without storing it in the buffer. (After detecting the XOFF code, the host computer must stop transmission before the printer receive buffer becomes full.)
z The printer sends an XOFF code (13H) when the power is off. (Transmission or non- transmission of the XOFF code is selectable by means of the parameter setting.)
z The DTR signal is always “High” (READY). z The RTS signal is always “High”.
dREADY/BUSY (DTR) Protocol
z When initialized after the power is turned on, this printer becomes ready to receive data and turns the DTR signal to the “High” level (READY).
z The printer turns the DTR signal to the “Low” level (BUSY) when the blank positions in the receive buffer are 800 bytes or less.
z The printer turns the DTR signal to the “High” level (READY) when the blank positions in the receive buffer are 2K bytes or more.
z When there are no blank positions in the receive buffer, the printer discards data received exceeding the receive buffer capacity, without storing it in the buffer. (After detecting the BUSY signal, the host computer must stop transmission before the printer receive buffer becomes full.)
z The RTS signal is always “High”.
- 4 -