Notes
Refer to
(1)No matter what character set or character code is selected, no memory will be wasted.
(2)When a new writable character is stored, the Flash Memory Card Format Command ([ESC] J1) or the ATA Card Format Command ([ESC] JA) must be transmitted.
(3)A character code already stored can be stored in the flash memory card again if the Bit Map Writable Character Command ([ESC] XD) is transmitted, but memory will be consumed with every storage. Memory can be efficiently used by sending the Memory Card Format Command ([ESC] J1) before storing.
(4)If a flash memory card is used, and a label issue operation is performed after sending the Bit Map Writable Character Command ([ESC] XD), the image buffer is automatically cleared.
(5)When the storing operation stops after storing the writable character and logos, the printer automatically enters the online mode (label issue operation) after about 10 seconds. In this case, when the flash memory card is used, the image buffer is automatically cleared.
(6)Only a
Memory Card Format Command (for flash memory card) ([ESC] J1) Memory Card Format Command (for ATA card) ([ESC] JA)
- 164 -