Siemens 1015N-2MFM-1A manual Table of Contents

Table Of Contents		1015N-2MFM-1A
	TABLE OF CONTENTS
			Page
1.	Introduction		1
2.	1015N-2M Modem Card Setup		1
2.1	Option 1 Mounting Kit 1015N-2M-MK1		1
2.2	Option 2 Mounting Kit 1015N-2M-MK2		1
2.3	Option 3 Mounting Kit 1015N-2M-MK3		1
	Figure 1. 1015N-2M Modem Card and Attaching Hardware		2
3.	Technical Specifications		2
4.	1010N Flowmeter System Requirements		2
5.	Preliminary Installation Notes and Cautions		2
5.1	1015N-2M Modem Card Installation		2
	Module Loading Option 1		3
	Module Loading Option 2		3
	Module Loading Option 3		3
5.1.1	Option 1 Installation Procedure (Mounting Kit 1015N-2M-MK1)		3
	Figure 2. 1010N Flowmeter Access Cover Removal		3
	Figure 3. Option 1 Installation (side view)		4
5.1.2	Option 2 Installation Procedure (Mounting Kit 1015N-2M-MK2)		5
	Figure 4. Option 2 Installation (side view)		6
5.1.3	Option 3 Installation Procedure (Mounting Kit 1015N-2M-MK3)		6
	Figure 5. Option 2 Installation (side view)		7
5.2	Setting 1010N Flowmeter RS-232 Parameters		8
5.3	Telephone Line Connections		8
6.	Communications Configuration		9
7.	Windows HyperTerminalTM Setup		9
	1015N-2M Reconfiguration Procedure		9
APPENDICES
Appendix A	“AT” Command Set and “S” Registers		A-1
	“AT” Commands		A-2
	“S” Registers		A-4
	“AT” Commands and “S” Registers Exclusive to the PE2400		A-5
	Dial Modifiers		A-5
	Ampersand (AT&) Commands		A-6
	Percent (AT%) Commands		A-6
	“S” Registers		A-7
Appendix B	Engineering Drawings		B-1

i