Toshiba 351C, 451C, 281C manual DC Department Code, Department Code DC Digit

3. Printing

-Saddle Stitch (Portrait)/Saddle Stitch (Landscape) — Select this to staple double in the center for a booklet to be printed. Select this only when booklet printing is performed.

NOTES: • This option cannot be selected if a finisher is not installed.

•“Saddle Stitch (Portrait)/Saddle Stitch (Landscape)” can be selected only when the Saddle-stitch Finisher is installed.

DC (Department Code)

In the DC menu, you can specify your department code, if this equipment is enabled the department codes. Before specifying the department code, you must check the Depart- ment Code option in the Printing Modes menu. Then specify the department code in this menu.

NOTE: This menu is only displayed for Mac OS X 10.2.4 to 10.2.8. When you want to set the department code in Mac OS X 10.3.x, set in the Print Mode menu.

P.288 "Print Mode"

1

2

3

4

5

SUPPLEMENT: How the equipment performs printing for an invalid department code print job, which no department code or invalid department code is specified, varies depending on the Department Code Enforcement setting that can be set from TopAccess Administrator mode. When the Department Code Enforcement is set to "ON", the invalid department code print job will be stored in the invalid department code print job list without printing. When the Department Code Enforcement is set to "Print", the invalid department code print job will be printed. When the Department Code Enforcement is set to "Delete", the invalid department code print job will be deleted without printing.

1)Department Code (DC) - Digit 1

Select the first digit of the department code.

296 Printing Guide — Printing from Macintosh