2. Installing Client Software
Installing Client Software for Parallel Printing
This section describes how to install the client software when this equipment is con- nected with a printer cable.
There are three ways to set up the printer drivers for parallel printing:
•Using the installer in the Client Utilities
When you insert the Client Utilities
P.27 "Installation for Parallel Printing Using the Installer"
•Using Plug and Play
When this equipment is connected to a parallel port of Windows 98, Windows Me, Windows 2000, Windows XP, and Windows Server 2003 computers, the Plug and Play Wizard automatically starts. While you can install a printer driver using this method, other client software cannot be installed.
P.32 "Installation for Parallel Printing by Plug and Play"
•Using Add Printer Wizard
When you want to install different printer drivers after installing a printer driver using Plug and Play, or when you want to install the printer drivers without using the installer or Plug and Play, install the printer drivers using the Add Printer Wizard.
P.40 "Installation for Parallel Printing by Add Printer Wizard"
Installation for Parallel Printing Using the Installer
Installing the client software for parallel printing
The following describes an installation on Windows 2000. The procedure is the same when other versions of Windows used.
NOTE: You must log into Windows as a user who has the “Administrators” or “Power Users” privilege when using Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003.
1.Insert the Client Utilities CD-ROM into the CD-ROM drive.
•The installer automatically starts and the Choose Setup Language dialog box appears.
•If the installer does not automatically start,
2.Select your language and click [OK].
•The InstallSheild Wizard dialog box appears.
Printing Guide — Installing Client Software for Windows | 27 |