Ok.Zooming

FAST—for good quality documents, without drawings or small details

NORMAL—for documents with drawings or small char- acters

QUALITY—for maximal resolution

Press OK.

5Your e-STUDIO60F can reduce or magnify a spe- cific part of a document from 25% to 400%. Set the desired zoom value with the key pad and press

6You can change the origin of the flatbed scanner (by default, this is the back left angle of the scanner window marked with arrows).

By entering new values of x and y given in millime- tres, you will move the scanning zone as shown on the figure below. Confirm the entries with

OK.ORIGIN

7If the document is too light or too dark, you may change the scanning contrast. Press / or O as many times as necessary to choose the desired contrast, as shown by the position of the cursor.

Press OK.

CONTRAST

8You can adjust the saturation. Saturation is the col- ourfulness judged in proportion to its brightness. Use / to change the setting: - is more grey, + is more saturated. Confirm with OK. SATURATION

9If you have chosen colour copy, you can adjust the RGB values. All colours can be defined as combi- nations of red (R), green (G) and blue (B). You can change the values for each of these basic colours

with /. Press OK.R.G.B.

10 You can adjust the luminosity (brightness) of the printer. Use / to change the setting: - is darker, +

is lighter. Press OK.	LUMINOSITY
11 Use / to set whether you	use plain, coated,
or photo paper, or transparent film and press
OK.	»PLAIN PAPER