Advanced settings, Settings list, Fax settings

Advanced settings

Settings list

You may print a list of your e-STUDIO60F’s parameter settings to monitor any changes made to the default parameters!

Press M, 54 and OK.

Fax settings

Reception mode

If you want to receive fax messages with a modem (with a PC) connected on the same telephone line as the e-STUDIO60F, you must disable automatic fax re- ception.

Press M, 241 and OK. Use / to choose MANUAL (to disable automatic reception) or FAX (to receive faxes on the e-STUDIO60F automatically).

Memory fax reception (without paper)

When the paper is finished or the cartridges are empty, faxes will be stored in the memory. You can disactivate this function.

1Press M, 242 and OK. Use / to choose one of the following options:

WITHOUT PAP—faxes will be stored in the memory if the printer is not available.

WITH PAPER—fax reception will be refused if the print- er is not available.

2Confirm with OK.

Number of copies

You may print incoming documents more than once.

Press M, 243 and OK. Enter a number (1 to 99) and press OK.

Sorted printing

When you receive documents of several pages, they will be received in the memory and then printed out in the correct order. You can avoid this by de-activating sorted printing:

Press M, 244 and OK. Use / to choose WITH or WITHOUT and press OK.

Sorted sending

Documents of several pages are scanned into the memory and then sent. You can disable this function.

Press M, 232 and OK. Use / to choose WITH or WITHOUT and press OK.

SMS settings

When you select your country when setting up the e-STUDIO60F, the parameters for SMS emission and reception will be pre-set. If these settings do not work or if you want to use another provider, you will need to change these settings. Your SMS service provider will provide the numbers you need.

SMS emission

1Press M, 4611 and OK.

2Enter the telephone number your machine has to dial to send SMS messages. Press OK.

SMS reception

1Press M, 4612 and OK.

2Enter the telephone number to receive SMS mes- sages. Press OK.

SMS alternative reception

You might wish to receive SMS from a second provider. In that case you will have to enter a second telephone number to receive SMS messages.

1Press M, 4621 and OK.

2Enter the second telephone number for SMS recep- tion and press OK.

Automatic printing

Press M, 451 and OK. Use / to choose whether SMS messages should be printed out automatically or not and press OK.

Beep

Press M, 452 and OK. Use / to choose whether the e-STUDIO60F should emit a beep to notify you when an SMS message is received and press OK.

Sender name

Press M, 453 and OK. Use / to choose whether SMS messages that you send should include your name. Confirm with OK. (Enter the name using func- tion 22)

Scan settings

Flatbed scanning

M, 271, OK—Resolution

M, 272, OK—Zooming

M, 273, OK—Origin

M, 274, OK—Contrast

M, 275, OK—Saturation