Country selection, Inserting cartridges

vIf you want to connect the e-STUDIO60F to a PC, please refer to the chapter PC connection. You must install the software first and then connect the e-STUDIO60F to the PC!

After you have connected the e-STUDIO60F to the mains, it will prompt you to make some basic settings as follows.

3Take the ink cartridges out of their packaging and remove the protective strip.

v Please make sure that the protective strip was re- moved completely.

Be careful not to touch the nozzle or the con- tacts!

Country selection

1Press OK.

2Use / to choose your country.

3Press OK twice.

Inserting cartridges

Before you can print documents, there have to be ink cartridges in your e-STUDIO60F. Therefore two free cartridges for a few test pages are included with your machine.

The display will indicate if one of the cartridges is emp- ty or if there is no cartridge in the e-STUDIO60F.

1Open the machine by pulling the lever under the control panel.

2Press the lever in the middle of the cartridge holder to open the holder.

4Insert the colour cartridge with the contacts for- ward and the “nose” down into the left compart- ment of the cartridge holder.

5Insert the black cartridge into the right compart- ment. Close the cartridge holder. You’ll hear a click when it snaps home.

6Close the machine.