Hints & tips, Change cartridges

Hints & tips

In case of a paper jam, try to pull out the paper. If this is not possible, press M, 74 and OK to eject the pa- per.

If a document is not drawn in correctly by the automat- ic feeder, press the button on the scanner cover and open the scanner cover.

Press the small lever and carefully remove the docu- ment.

If your e-STUDIO60F makes vertical stripes when cop- ying, scanning or faxing, the scanner class might be dirty.

When your e-STUDIO60F makes horizontal stripes when copying, scanning or faxing, the scanner might be locked.

1Open the printer cover.

2Unlock the scanner with the lever on the underside of the printer cover and close the machine.

If your e-STUDIO60F doesn’t print correctly, the reason might be that the protective strips were not removed completely from the printing cartridge.

Open the printer cover and remove the cartridges. Re- move film residue, replace the cartridges and close the machine.

If sending a fax fails, you can check the line by using the manual call function.

1Insert a document.

2Press M, 35 and OK. The built-in loudspeaker will be turned on and you should hear the dial tone.

3Dial the desired number and press Y. You will be able to hear how the connection is established.

If you can’t solve your problem with the proposals above, please unplug your e-STUDIO60F from the mains and reconnect it after a few minutes.

The display will indicate if one of the cartridges is emp- ty.

Please use only original TOSHIBA ink cartridges!

1Open the machine by pulling the lever under the control panel.

2The position of the cartridge holder will show you which cartridge needs to be replaced. The arrows point to the cartridge that is empty: