Toshiba 60F manual Safety instructions

Page 5

Safety instructions

Please read and follow all warning notices and instruc- tions.

The e-STUDIO60F should be installed on a level and stable surface. The surface should be smooth and hori- zontal. The machine may be damaged if it falls and may cause serious injury, especially to small children. Place the e-STUDIO60F at least 10 cm away from other elec- trical devices and objects.

Do not place the e-STUDIO60F in direct sunlight. Do not place it near to a radiator, heater, radio, television or air conditioning unit. Do not allow it to come into contact with dust, water or chemicals.

Make sure that air can circulate freely around the e-STUDIO60F. Do not operate the e-STUDIO60F in enclosed spaces such as boxes, cupboards, cabinets etc. Do not cover the e-STUDIO60F. Do not place the e-STUDIO60F on soft surfaces such as beds, duvets, cushions, sofas or carpets as there is a risk of over- heating and fire.

Only use the power supply included with the product. Using an unauthorised power supply may damage the e-STUDIO60F.

Do not touch telephone wires or network cables where the insulation is missing or damaged unless they are al- ready disconnected.

If the housing of your e-STUDIO60F or the power sup- ply—in particular the power or telephone cables—, are damaged, please unplug the e-STUDIO60F. The hous- ing of the e-STUDIO60F may only be opened by au- thorised service personnel.

Unplug the e-STUDIO60F from the mains and tele- phone line before cleaning. Do not use liquid or aerosol cleaning agents such as sprays, or polishes.

Do not expose the e-STUDIO60F to rain or any oth- er form of moisture. There is a risk of electric shock or fire. If any liquid is accidentally spilled into the e-STUDIO60F, immediately remove the power plug and have the e-STUDIO60F professionally inspected.

Your e-STUDIO60F has been tested to EN 60950 or IEC 60950 and may only be operated on telephone networks and power supplies that conform to these standards.

In a thunderstorm, disconnect the e-STUDIO60F from both the mains and the telephone line. If you are una- ble to disconnect the e-STUDIO60F, avoid using the fax machine or the telephone during the storm. There is a risk of electric shock from lightning and risk of damage to the machine.

Your e-STUDIO60F is only intended for use in the coun- try in which it was purchased. It may only be operated with telephone systems and power equipment which meet these standards.

5

Image 5
Contents Networking Documents Description of the machine Symbols on the displayOverview of functions Contents Safety instructions Set-up InstallationUnpacking Loading paper Power supplyConnections Additional devicesInserting cartridges Country selectionCartridge alignment Software installationYour name and number Time and datePage Settings Directory Sending a fax Y FaxDirectory a Flatbed scannerRedial L Resolution f%FBroadcast Contrast ODelayed polling Delayed transmissionPolling Polling receptionInserting a document CopyStandard copy K Creative copy KOK.ZOOMING Open the scan window Z Scan to PCPage Receiving an SMS Send SMSSettings list Advanced settingsFax settings SMS settingsAutomatic feeder scanning Printer settingsChange cartridges Hints & tipsCartridge capacity CommandsLogs Consulting or modifyingLock Care and maintenanceCleaning and aligning the cartridges Functions list AnnexDisclaimer notice Technical settingsTechnical data Declaration of Conformity Page Index 5103 506 4024.1 EN To C5