Kustom none manual Table of Contents

Page 2

Table of Contents

Table of Contents
Safety Information	2
Front Control Panel	6
Rhythm Channel Controls	8
Lead Channel I Controls	10
Lead Channel II Controls	12
Mastering the Cross	14
Rear Control Panel	16
Amp Specifications	20
Signal Flow Diagram	21

Kustom Amplification

3015 Kustom Drive

Hebron, KY U.S.A. 41048

www.kustom.com

1.888.4KUSTOM

1.888.458.7866

© Kustom Amplification. All specifications are subject to change without prior notice.

1

Image 2

Contents Page Table of Contents FCC Statements Page S a f e t y I n f o r m a t i o n S a f e t y I n f o r m a t i o n S a f e t y I n f o r m a t i o n S a f e t y I n f o r m a t i o n Front Control Panel 8BOOST INDICATOR When lit, this indicates that the Boost func- tion is active Rhythm Channel Rhythm Channel Settings American Clean Classic Chime Black AngusLead I Channel Lead I Channel Settings Thick Modern Cranked Vintage Heavy DynamicLead II Channel Lead II Channel Settings Tight Aggression Fluid Legato Unleashed MonsterBright + Tight BrightBright + Gain THE CROSSTight + Thick 4 Bright + Thick5 Bright + Thick + Tight Bright + Gain +Rear Control Panel Vintage 30-loaded Straight-front4x12 speaker cabinet. When the switch is OUT, it emulates the same speakers in a Slant- front 412 cabinet. Kustom went to great lengths to make sure that this signal sounded like the actual amp head and speaker cabinet combinations. This was accomplished in a studio envi- ronment using condenser microphones to analyze the tonality of the Double Cross when heard at “head level” versus “close mic’d” directly in front of the speaker. The result is a signal that reflects the true characteristics of these cabinets as heard by a player. If you haven’t tried the Double Cross’ Direct Out yet, we urge you to experiment with it for both live and studio ap- plications 0 dBV 1v Rack Effects Optimal 10dBV 0.3v Pedal Effects OptimalEffects Loop Syncing System Gain Amp SpecificationsNominal Signal to Noise Effects LoopSignal Flow Diagram