Kustom none manual Lead II Channel

Lead II Channel

6

1 2 3 4 7 8

5

The Lead II channel is voiced differently from the Lead I channel, pro- viding a classic high-gain “cranked amp” tone and a powerful contrast to the Lead I channel. Although both Lead channels provide a dupli- cate set of controls, you’ll notice they each have their own personality and tonal characteristics. Experiment with both to nail the sounds in your head.

1)PRESENCE This controls the upper treble frequencies and can be used to accentuate “percussive” tones such as your picking attack. Alternately, by lowering this control, it can help soften biting tones when desired.

2)TREBLE This passive EQ adjusts the high frequency equalization of the amplifier, but also interacts with the Bass and Middle controls as follows: As the Treble is increased, the Bass automatically decreases and the Middle slides down in frequency. Conversely, if the Treble is decreased, the Bass automatically increases and the Middle slides up

14in frequency.

3)MIDDLE This passive EQ adjusts the midrange equalization of the amplifier. It interacts with the Bass and Treble as described in the Treble EQ section. For a heavier, more distorted sound, set the Mid- dle lower. For more of a vintage-style, cleaner sound, set the Middle higher.

4)BASS This passive EQ adjusts the low frequency equalization of the amplifier. It interacts with the Middle and Treble as described in the Treble EQ section. For a tighter low end, use the Bass EQ set in its lower range. This is particularly helpful when using the amp at very loud settings.

5)LEAD II INDICATOR The word LEAD II lights up when the Lead II channel is active.

6)THE CROSS The Cross offers these functions: (1) Bright: This en- hances high-end response and tightens the low end. (2) Gain: This