Toshiba 120 CHECK3 Is the paper loaded correctly?, CHECK2 Is the orientation of document setting

Page 30

4 Characters or Graphics are not Printed in Correct Position

If a document is printed skewed or partly off the paper, follow the steps listed below.

CHECK1 Is the paper size loaded in the tray the same as that specified in the printer driver?

Check if the "Paper Size" options suit the size of the paper loaded in the tray.

If the "Fit To Page" setting is activated, make sure that the paper size selected from the drop-down list of the "Fit To Paper Size" option is the same as the size of the loaded paper.

CHECK3 Is the paper loaded correctly?

If a document is physically damaged when it is output or the image is skewed on the paper, discard the damaged sheet, reinsert the paper supply and print again. Insert the paper so that there is no visible space between the paper and the paper guides.

Reference: See "LOADING PAPER" in the Operator’s Manual for more details on inserting paper.

CHECK2 Is the orientation of document setting

CHECK4 Did you correctly specify the margins for the

correct?

Click the "Paper" tab in the printer driver setup

application in use?

screen, and verify if the "Image Orientation" option

Check the layout of the document margins and the

is set to your requirements.

paper size settings for the application you are

 

using. Also check if the print settings are specified

 

correctly to suit the paper size.

 

Reference: Faint, Uneven or Smeared Print Output

CONTENTS

INDEX

28

Image 30
Contents Page Contents How to Use the Online Manual How to Control the Online ManualHow to Print Out the Online Manual Flow chart shown below provides printing overview Printing OverviewBasic Printing On Windows 95/98/Me/NT 4.0, click the Properties buttonStarting the Printer Driver Using the Start Button Windows 2000/XPWindows 95/98/Me/NT Printer Driver Settings TabHow to Print a Watermark Printing a WatermarkFitting the Printed Image to the Paper Printing Multiple Pages on One Outline of the Print Status Window Scanning Overview Or WIA* 2-compliant application Camera Wizard Windows XPScanning an Image from a TWAIN-Compliant Application part Place the original on the original tableClick the Scanning button after setting your preferences Click the Preview button. The preview image will appearSpecify the scanning area, and set the scan preferences Scanner Driver Settings Set-up screenPreview screen Auto Scan Area Judgement buttonContents 15 Index Select picture type, and click the Preview button Click the Scan buttonClick the Next button Select the Picture type, and click the Next button Click the Finish button Outline of Button Manager Functions of Button Manager are shown belowRightbar. -click the Button Manager icon on the task Button Manager SettingsSelect Settings from the displayed pop-up menu Click the OK buttonIdentifying Unit Problems Printing troubleCHECK2 Is the interface cable connected securely? Check the Connection between the Unit and ComputerIf the USB cable becomes disconnected USB cableCheck Your Computer CHECK1 Is there enough computer memory or hard disk space?CHECK2 Is your hard disk fragmented? When you make sure that the USB port is enabled Then click Performance and MaintenanceSettings, and then click Control Panel Install the software, referring to InstallingFailed to Install the MFP Driver Windows 2000/XP Contents 27 Index Faint, Uneven or Smeared Print OutputCorrect? CHECK2 Is the orientation of document settingCHECK3 Is the paper loaded correctly? Application in use?Nothing Prints CHECK2 Is the Online indicator off?CHECK4 Has the printer driver been installed properly? CHECK1 Has a paper jam occurred?CHECK1 Is the original clean? CHECK2 Have you specified a suitable resolution?Poor Scanning Result Scanned Image is Incorrectly Positioned CHECK1 Have you placed the original straight?Original table? Unable to Scan the Image CHECK1 Is your application compliant to TWAIN?Click Add or Remove Programs Uninstalling Toshiba Personal MFP Series SoftwareClick the start button, and then click Control Panel Restart your computerIndex Twain