Setup Flow for Fax Features
This section describes the minimum setup flow to configure this equipment for Fax features.
Setup flow for network-fax transmission
The fax transmission using the Network Fax Driver is available only when the Network Printer Kit (optional) is installed in addition to the Fax Kit (optional) and the External Keyboard (optional).
| Connecting over TCP/IP Network or Internet | |
Windows 98 |
| |
Windows Me | Printing a document | |
Windows NT 4.0 | using Network Fax Driver | |
Windows 2000 | ||
| ||
Windows XP |
| |
Windows Server 2003 |
| |
Windows Vista |
| |
| Send a document as | |
| fax document via | |
| Public Switched Telephone | |
| network |
G3 Facsimile
Using the Network Fax Driver, users can send a document to this equipment as a print job. The equipment then sends the job to the fax numbers specified by the user through the Public Switched Telephone Network.
To send a fax through the Public Switched Telephone Network, users must configure the equip- ment accordingly.
System requirements
The Network Fax Driver is available for following computers:
yDisplay resolution
1024 x 768 dots or more
yDisplay color
High Color (16bit) or higher is recommended
yCPU
Pentium 133 MHz minimum (Pentium 266 MHz or faster recommended)
yMemory
64MB for Windows 98
96MB for Windows Me and Windows NT 4.0 128MB for Windows 2000/XP/Server 2003 512MB for Windows Vista
yOS
Windows 98 (Windows 98 Second Edition Recommended) Windows Me
Windows NT 4.0 Service Pack 6a Windows 2000 Service Pack 4
Windows XP Service Pack 1 / Service Pack 2 Windows Server 2003 Service Pack 1 or later Windows Vista
Setup Flow for Fax Features 29