Dell 4600 technical specifications Environmental

Page 33

Environmental

 

 

 

 

 

Temperature:

 

 

 

 

 

Operating

10º to 35ºC (50º to 95ºF)

 

 

NOTE: At 35°C (95°F), the

 

 

maximum operating altitude is 914

 

 

m (3000 ft).

 

 

 

 

Storage

–40º to 65ºC (–40º to 149ºF)

 

Relative humidity

20% to 80% (noncondensing)

 

 

 

 

Maximum vibration:

 

 

 

 

 

Operating

0.25 G at 3 to 200 Hz

 

 

 

 

Storage

2.20 Grms at 10 to 500 Hz

 

 

 

 

Maximum shock:

 

 

 

 

 

Nonoperating (half-sine pulse)

105 G, 2 ms

 

 

 

 

Nonoperating (faired-square

32 G with a velocity change of

 

wave)

596.9 cm/sec (235 inches/sec)

 

Altitude:

 

 

 

 

 

Operating

–15.2 to 3048 m (–50 to 10,000 ft)

 

 

NOTE: At 35°C (95°F), the

 

 

maximum operating altitude is 914

 

 

m (3000 ft).

 

 

 

 

Storage

–15.2 to 10,670 m (–50 to 35,000

 

 

ft)

 

 

 

 

 

 

 

Back to Contents Page

 

 

Image 33
Contents Abbreviations and Acronyms Advanced Troubleshooting Diagnostic LightsLight Pattern Problem Description Suggested Resolution Beep Codes System boardCode Cause System Messages Message Possible Cause Corrective ActionReseat the memory modules Back to Contents Getting Started Before You BeginRecommended Tools Shutting Down Your ComputerRemove the computer cover Back to Contents Replacing the Computer Cover Removing the Computer Cover PCI Cards Removing and Installing PartsAGP Card Removing an AGP CardReplace the computer cover Memory Installing an AGP CardDDR Memory Overview Memory Installation Guidelines Installing MemoryFront Panel Replacing the Front Panel Removing the Front PanelRemoving the Front-Panel Insert DrivesReplacing a Hard Drive Remove the front panelPage Remove the existing hard drive Adding or Replacing a Second Hard DriveReinstall the existing hard drive into the computer Release and remove the front panel Adding a Floppy DriveAdding a Second CD or DVD Drive Release and remove the front panel Removing the Microprocessor MicroprocessorPage Installing the Microprocessor Removing the Fan Assembly Fan AssemblyRemove the microprocessor heat sink Remove the fan assembly Replacing the Fan AssemblySystem Board Removing the System BoardPower Supply Installing the System BoardRemoving the Power Supply Replacing the Power Supply BatteryBattery Overview Reinstall the fan assemblyReplacing the Battery Technical Specifications Power Ports and ConnectorsVideo AudioEnvironmental Entering System Setup System SetupViewing Settings System Setup ScreensSystem Setup Options AGP Aperture System Memory Channel ModeCPU Information CPU Speed Bus SpeedBoot Sequence Enter system setup Clearing Forgotten PasswordsRemove the computer cover Inside View of Your Computer System Board Components Technical OverviewOutput Voltage Minimum Current a Maximum Current A1 Power Supply DC Connector Pin AssignmentsDC Power Connector P2 DC Power Connector P1Pin Number Signal name AWG Wire Pin Number Signal Name 18-AWG WireDC Power Connector P4 DC Power Connectors P3, P5, P6, P8 and P9DC Power Connector P7 Pin Number Signal Name 22-AWG WireBack to Contents