Dell 4600 technical specifications Replacing the Computer Cover

Page 8

Back to Contents Page

Replacing the Computer Cover

Dell™ Dimension™ 4600 Series Service Manual

1.Ensure that all cables are connected, and fold cables out of the way.

2.Ensure that no tools or extra parts are left inside the computer.

3.Place the cover on the computer.

4.Slide the cover towards the front of the computer until it fits completely into place.

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

5.Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page

Image 8

Contents Abbreviations and Acronyms Light Pattern Problem Description Suggested Resolution Advanced TroubleshootingDiagnostic Lights Code Cause Beep CodesSystem board Reseat the memory modules System MessagesMessage Possible Cause Corrective Action Back to Contents Before You Begin Getting StartedRecommended Tools Shutting Down Your ComputerRemove the computer cover Back to Contents Replacing the Computer Cover Removing the Computer Cover Removing and Installing Parts PCI CardsReplace the computer cover AGP CardRemoving an AGP Card Installing an AGP Card MemoryMemory Installation Guidelines Installing Memory DDR Memory OverviewFront Panel Removing the Front Panel Replacing the Front PanelDrives Removing the Front-Panel InsertReplacing a Hard Drive Remove the front panelPage Adding or Replacing a Second Hard Drive Remove the existing hard driveReinstall the existing hard drive into the computer Adding a Floppy Drive Release and remove the front panelAdding a Second CD or DVD Drive Release and remove the front panel Microprocessor Removing the MicroprocessorPage Installing the Microprocessor Fan Assembly Removing the Fan AssemblyReplacing the Fan Assembly Remove the microprocessor heat sink Remove the fan assemblySystem Board Removing the System BoardRemoving the Power Supply Power SupplyInstalling the System Board Battery Replacing the Power SupplyBattery Overview Reinstall the fan assemblyReplacing the Battery Technical Specifications Ports and Connectors PowerVideo AudioEnvironmental System Setup Entering System SetupViewing Settings System Setup ScreensSystem Setup Options System Memory Channel Mode AGP ApertureCPU Information CPU Speed Bus SpeedBoot Sequence Clearing Forgotten Passwords Enter system setupRemove the computer cover Technical Overview Inside View of Your Computer System Board ComponentsPower Supply DC Connector Pin Assignments Output Voltage Minimum Current a Maximum Current A1DC Power Connector P1 DC Power Connector P2Pin Number Signal name AWG Wire Pin Number Signal Name 18-AWG WireDC Power Connectors P3, P5, P6, P8 and P9 DC Power Connector P4DC Power Connector P7 Pin Number Signal Name 22-AWG WireBack to Contents