Replacing Memory Module(s)
1Follow the procedures in "Before You Begin" on page 11.
2Press out the securing clip at each end of the memory module connector.
CAUTION: Do not install ECC memory modules.
3Align the notch on the bottom of the memory module with the tab in the memory module connector.
4
3
2
1
1 | cutouts (2) | 2 | tab |
3 | notch | 4 | memory module |
CAUTION: To avoid damage to the memory module, press the memory module straight down into the connector while you apply equal force to each end of the memory module.
4Insert the memory module into the memory module connector until the memory module snaps into position.
If you insert the memory module correctly, the securing clips snap into the cutouts at each end of the memory module.
22
Memory Module(s)