Dell 2010 service manual Replacing the Processor

Page 57

Replacing the Processor

CAUTION: Ground yourself by touching an unpainted metal surface on the back of the computer.

CAUTION: When replacing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket.

1Follow the procedures in "Before You Begin" on page 11.

2Unpack the new processor, being careful not to touch the underside of the processor.

CAUTION: You must position the processor correctly in the socket to avoid permanent damage to the processor and the computer when you turn on the computer.

3If the release lever on the socket is not fully extended, move it to that position.

2

1

4

3

1

socket

2

processor pin-1 indicator

3

processor

4

release lever

4Align the pin-1 corners of the processor and socket.

CAUTION: To avoid damage, ensure that the processor aligns properly with the socket, and do not use excessive force when you install the processor.

Processor

57

Image 57
Contents W . d e l l . c o m s u p p o r t . d e l l . c o m July Contents PCI and PCI Express Cards Processor Fan Heat Sink Assembly Changing Boot Sequence for Inside View of Your Computer Technical OverviewSystem Board Components Cpufan DIMM1 Technical Overview Technical Specifications Recommended Tools Before You BeginTurning Off Your Computer Safety Instructions Before You Begin Before You Begin Removing the Computer Cover Computer CoverReplacing the Computer Cover Place the computer in an upright position Computer Cover Removing the Front Bezel Front BezelReplacing the Front Bezel Removing Memory Modules Memory ModulesReplacing Memory Modules Cutouts Securing clip snapped in position Memory Modules Removing PCI and PCI Express Cards PCI and PCI Express CardsScrew Card Replacing PCI and PCI Express Cards PCI and PCI Express Cards PCI and PCI Express Cards Installed Removing a Hard Drive DrivesPower cable Data cable Screws Removing a Media Card Reader Replacing a Hard DriveFlexBay USB cable Screws Replacing a Media Card Reader Break-away metal plate Removing an Optical Drive Power cable Data cable Screws Replacing an Optical Drive Drives Drives Drives Removing the Power Switch Module Power Switch ModuleHard drive activity light Replacing the Power Switch Module Power Switch Module Removing the Front I/O Panel Front I/O PanelReplacing the Front I/O Panel Front I/O Panel Front I/O Panel Removing the Processor Fan and Heat Sink Assembly Processor Fan and Heat Sink AssemblyProcessor Fan and Heat Sink Assembly Replacing the Processor Fan and Heat Sink Assembly Processor Fan and Heat Sink Assembly Removing the Processor ProcessorProcessor Release lever Socket Replacing the Processor Processor Removing the System Board System BoardLift the system board up and out Replacing the System Board System Board Removing the Power Supply Power SupplyReplacing the Power Supply Power Supply Power Supply Removing the Battery BatteryReplacing the Battery System Setup Entering System SetupOverview System Setup System Setup Options USB Controller-Enabled or Disabled Enabled by Load Defaults Changing Boot Sequence for the Current Boot Clearing Forgotten Passwords and Cmos Settings Click Drivers & Downloads→Select Model Flashing the BiosSystem Setup System Setup