15
System Setup
Overview
Use System Setup:
•To change the system configuration information after you add, change, or remove any hardware in your computer.
•To set or change a
•To read the current amount of memory or set the type of hard drive installed.
Before you use System Setup, it is recommended that you write down the system setup screen information for future reference.
CAUTION: Do not change the settings in system setup unless you are an expert computer user. Certain changes can cause your computer to work incorrectly.
Entering System Setup
1Turn on (or restart) your computer.
2When the DELL logo appears, press <F2> immediately.
NOTE: Keyboard failure may result when a key on the keyboard is held down for extended periods of time. To avoid possible keyboard failure, press and release <F2> in even intervals until the system setup screen appears.
NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop, then shut down your computer and try again.
System Setup Screens
Options List — This field appears on the top of the system setup window. The tabbed options contain features that define the configuration of your computer, including installed hardware, power conservation, and security features.
System Setup
69