Replacing the Processor Fan and Heat Sink Assembly
CAUTION: When reinstalling the fan, ensure that you do not pinch the wires that run between the system board and the fan.
1Clean the thermal grease from the bottom of the processor fan and heat sink assembly.
CAUTION: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a requirement for optimal processor operation.
2Apply the new thermal grease to the top of the processor.
3Place the processor fan and heat sink assembly back onto the bracket.
4Ensure that the two clamp grips are aligned with the two bracket projections.
5Hold the processor fan and heat sink assembly in place and rotate the clamp lever 180 degrees
Processor Fan and Heat Sink Assembly
53