8Slide the holder along with the hard drive activity light and cable out through the front of the computer.
Replacing the Power Switch Module
1Slide the power switch module through the slot on the front panel.
2Press the holder and gently snap it into the front panel until it clicks into place.
3Gently push the hard drive activity light into its holder.
4Connect the power switch module cable to the power switch module connector (FP1) on the system board.
5Replace the hard drive (see "Replacing a Hard Drive" on page 33).
6Replace the front bezel (see "Replacing the Front Bezel" on page 20).
7Replace the computer cover on both the sides (see "Replacing the Computer Cover" on page 16).
Power Switch Module
45