Removing the Memory Module(s)
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1Remove the computer cover. See "Removing the Computer Cover" on page 15.
2Remove the graphics card. See "Removing the Graphics Card" on page 26.
Procedure
WARNING: The memory module(s) may become hot during normal operation. Allow the memory module(s) to cool before touching them.
1Press out the securing clip at each end of the
NOTE: If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from the connector.
2Grasp the memory module and pull it upward.
3
2
1
1 | 2 memory module |
3securing clips (2)
Removing the Memory Module(s) | 17 |