Removing the Optical Drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1Remove the computer cover. See "Removing the Computer Cover" on page 15.
2Remove the front bezel. See "Removing the Front Bezel" on page 21.
Procedure
1Disconnect the power and data cables from the optical drive.
2Remove the screws that secure the optical drive to the chassis.
3Push and slide the optical drive out through the front of the computer.
NOTE: Repeat steps 1 to 3 to remove secondary
3
2 | 4 |
1
1 | power cable | 2 | data cable |
|
|
|
|
3 | screws (2) | 4 | optical drive |
|
|
|
|
4Set aside the optical drive in a secure location.
Removing the Optical Drive | 45 |