Replacing the Front USB Panel
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1Align and slide the front USB panel clamps into the front USB panel clamp slot.
2Replace the screw that secures the front USB panel to the front panel.
3Connect the front USB panel cables to the system board connector F_USB2. See
Postrequisites
1Replace the front bezel. See "Replacing the Front Bezel" on page 23.
2Replace the computer cover. See "Replacing the Computer Cover" on page 16.
56 Replacing the Front USB Panel