HP 5 Troubleshooting, Computer does not start

5 Troubleshooting

Refer to the documentation provided by the product manufacturer for information about peripheral-specific problems, such as issues with a monitor or a printer. The following tables present some issues you might encounter while installing, starting up, or using your computer and possible solutions.

For more information or for additional troubleshooting options, see Getting information on page 1.

Computer does not start

Symptom Possible solution

Error message: Hard disk drive error.

Restart the computer.

1.Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.

2.Click the Arrow button next to the red Shut Down button, and then click Restart.

Or, press and hold the Power button on the computer for 5 or more seconds to turn off the computer, and then press the Power button to restart the computer.

3.If Windows opens, immediately back up all important data to a backup hard disk drive.

4.Contact Support, whether it was possible or not to start up Windows. Either the hard disk drive or the system board may need to be replaced.

Computer will	Ensure that the cables connecting the computer to the external power source are plugged in
not turn on or	properly. When the cables connecting the computer to the external power source are plugged
start.	in properly, and the wall outlet is functioning, the green power supply light on the back of the
	computer should be on; if it is not, contact Support.
	If the display (monitor) is blank, the monitor might not be properly connected. Connect the
	monitor to the computer, plug it in, and turn it on. See Display (monitor) on page 13.
	Test the wall outlet by connecting a different electrical device to it.

ENWW Computer does not start 11