Dell X87001253BLK, XPS 8700 manual Removing the Secondary Hard-Drive optional

Page 40

Removing the Secondary Hard-Drive (optional)

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

WARNING: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.

CAUTION: To avoid data loss, do not remove the hard drive while the computer is on or in Sleep state.

CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.

Prerequisites

1Remove the computer cover. See "Removing the Computer Cover" on page 15.

2Remove the primary hard-drive. See "Removing the Primary Hard-Drive" on page 35.

3Remove the hard-drive cage. See "Removing the Hard-Drive Cage" on page 38.

Procedure

1Remove the screws that secure the secondary hard-drive to the hard-drive cage.

2Slide the secondary hard-drive out from the hard-drive cage.

 

1

 

2

3

 

 

 

 

1

secondary hard-drive

2

screws (4)

3hard-drive cage

40 Removing the Secondary Hard-Drive (optional)

Image 40
Contents XPS Dell Inc Contents Removing the Graphics-Card Replacing the Primary Hard-Drive Removing the Media-Card Reader Removing the Processor Fan and Heat-Sink Entering the Service Tag in system setup Before You Begin Turn Off Your Computer and Connected DevicesSafety Instructions Recommended ToolsAfter Working Inside Your Computer Technical Overview Inside View of Your ComputerSystem-Board Components Fpanel Procedure Removing the Computer CoverReplacing the Computer Cover PostrequisitesRemoving the Memory Modules PrerequisitesReplacing the Memory Modules Cutouts Memory-module connector Tab Notch Memory module Postrequisites Removing the Front Bezel Procedure Replacing the Front Bezel Removing the Graphics-Card Bracket optional Replacing the Graphics-Card Bracket optional Removing the Graphics Card Power cable Securing tab Graphics card Replacing the Graphics Card Removing the Wireless Mini-Card Wireless mini-card connector Replacing the Wireless Mini-Card Removing the mSATA Drive Replacing the mSATA Drive Removing the Primary Hard-Drive Power cable Data cable Primary hard-drive Screws Replacing the Primary Hard-Drive Removing the Hard-Drive Cage Replacing the Hard-Drive Cage Removing the Secondary Hard-Drive optional Replacing the Secondary Hard-Drive optional Installing a third Hard-Drive optional Third hard-drive Postrequisites Removing the Optical Drive Replacing the Optical Drive Removing the Top Cover Replacing the Top Cover Removing the Media-Card Reader Replacing the Media-Card Reader Removing the Top I/O Panel Removing the Top I/O Panel Replacing the Top I/O Panel Removing the Front USB Panel Front USB panel Screw USB panel cables Replacing the Front USB Panel Removing the Power Button Module Power button module cable Power button module tabs Replacing the Power Button Module Removing the Chassis Fan Replacing the Chassis Fan Removing the Processor Fan and Heat-Sink Processor fan cable Replacing the Processor Fan and Heat-Sink Removing the Processor Release lever Securing tab Processor cover Socket Replacing the Processor Procedure Removing the Coin-Cell Battery Replacing the Coin-Cell Battery Removing the Power-Supply Unit Replacing the Power-Supply Unit Removing the System Board Screws System board Entering the Service Tag in system setup Replacing the System BoardEntering System Setup System SetupOverview System Setup Screens Sata MSATA Device Device Type Onboard Audio Controller LAN/WLAN Changing Boot Sequence Changing Boot Sequence for the Current BootClearing Forgotten Passwords Clearing Cmos Settings Flashing the Bios More Information To learn about Windows