Removing the Power Button Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1Remove the computer cover. See "Removing the Computer Cover" on page 15.
2Remove the front bezel. See "Removing the Front Bezel" on page 21.
3Remove the top cover. See "Removing the Top Cover" on page 47.
Procedure
1Disconnect the power button module cable from the system board connector F_PANEL. See
2Press the tabs on the power button module and lift the power button module to release it from the top panel.
Removing the Power Button Module | 57 |