APC AP8886, AP88XX, AP8861 manual Getting Started

Page 12

Specific assignment of Display IDs. Follow the instructions below before powering up any of the Rack PDUs in the group.

If it is desired to have a specific assignment of Display IDs, this can be achieved by powering up the units for the first time in the desired order, 1 to 4. For example, before powering up any of the Rack PDUs connected in a group, determine the Display ID order that you would like. Then, first power up the unit that you would like to have Display ID 1. After that unit has initialized and the LCD has started displaying its screens, power on the unit that you would like to have Display ID 2. Continue in the same way for units 3 and 4, if applicable for your setup.

Note: The Display ID can be configured from the web interface via the "Device Manager > Load Management > device load > Display ID" field.

Getting Started

To start using the Rack PDU:

1.Install the Rack PDU using the Rack Power Distribution Unit Installation Instructions that were shipped with your Rack PDU.

2.Apply power and connect to your network. Follow the directions in the Rack Power Distribution Unit Installation Instructions.

3.Establish network settings. (See “Establish Network Settings” on page 5.)

4.Begin using the Rack PDU by way of one of the following:

–“Web Interface” on page 40

–“Command Line Interface” on page 14

–“Rack PDU Front Panel” on page 9

Metered Rack PDU User Guide

4

Page 11 Page 13
Image 12
Page 11 Page 13
Contents User Guide Contents Log on to the Command Line Interface Web Interface Logs Administration Notification Device IP Configuration Wizard Troubleshooting Product Features IntroductionAccess Priorities for Logging on Types of User AccountsWatchdog Features Network Port SharingGetting Started Establish Network Settings TCP/IP configuration methodsDhcp and Bootp configuration INI file utilityOption 43 = 01 04 31 41 50 Command Line Interface Recovering from a Lost Password Rack PDU Front Panel FunctionFunction Display Tree Example Display Tree Example Load indicator LED Network Status LEDCondition Description 10/100 LEDCommand Line Interface About the Command Line InterfaceLog on to the Command Line Interface Remote access to the command line interfaceLocal access to the command line interface About the Main ScreenUsing the Command Line Interface IPv4 IPv6 Description OnlyCommand Syntax DescriptionCommand Response Codes Code MessageNetwork Management Card Command Descriptions AlarmcountAbout Option Arguments DescriptionBoot Option Argument DescriptionClrrst Console Date DeleteArgument Description DirDns EventlogExit FormatOption Argument Definition HelpNetstat NtpPing PortSpeedPrompt QuitReboot RadiusResetToDef Snmp, snmpv3System Tcpip Tcpip6User WebXferINI XferStatusDevice Command Descriptions Network Port Sharing CommandsBkLowLoad BkNearOverBkOverLoad BkReadingDevLowLoad DevNearOver DevOverLoadDevReading Argument DefinitionHumLow HumMinHumReading PhLowLoad PhNearOverPhOverLoad PhReading ProdInfo SensorNameTempHigh TempMaxTempReading Whoami Web Interface Supported Web BrowsersLogging On to the Web Interface Error Message Browser Cause of the Error URL address formatsWeb Interface Features Symbol DescriptionTabs Device status iconsOther Web interface features Quick LinksGroup Control using Network Port Sharing Network Port Sharing on the Web InterfaceMetered Rack PDU User Guide Alarm Status view About the Home TabOverview view Configuring Load Thresholds Device ManagementAbout the Device Manager Tab Viewing the Load Status and Peak LoadConfigure the Name and Location of the Rack PDU Resetting Peak Load and kWhConfigure Temperature and Humidity Sensors EnvironmentLogs Use the Event and Data LogsEvent log Example event log Rack PDU 4 Device low load Data log Path Logs Data optionsParameter Description How to use FTP or SCP to retrieve log files Scp username@hostnameoripaddressdata.txt ./data.txtAdministration Security Setting user accessAuthentication Local UsersRadius Setting Definition RadiusConfigure the Radius Server Summary of the configuration procedureConfiguring a Radius server on Unix with shadow passwords Supported Radius serversInactivity Timeout Administration Network Features TCP/IP and Communication SettingsTCP/IP settings Setting DescriptionDhcp response options APC Cookie. Tag 1, Len 4, Data 1APCPort Speed Ping ResponseDNS Query Type Selected Query Question to UseWeb Option DescriptionStatus Console Telnet 152.214.12.1145000 telnet 152.214.12.114Snmp SNMPv1 SNMPv3 FTP Server Administration Notification Configuring event actionsEvent Actions Types of notificationMetered Rack PDU User Guide Active, Automatic, Direct Notification Mail notificationSend a test message to a configured recipient Snmp traps Snmp Trap TestRemote Monitoring Service Setting DefinitionSyslog Informational is mapped to Info Administration General Options IdentificationSet the Date and Time ModeUse an .ini File Daylight savingEvent Log and Temperature Units Reset the Rack PDUChange the default temperature scale Color-code event log textConfigure Links About the Rack PDUDevice IP Configuration Wizard Capabilities, Requirements, and InstallationUse the Wizard Configure or reconfigure the TCP/IP settings locally Select Remotely over the network, and click NextSelect Locally through the serial port, and click Next How to Export Configuration Settings Summary of the procedureContents of the .ini file Retrieving and Exporting the .ini FileDetailed procedures Ftp open ipaddress Upload Event and Error Messages Event and its error messagesMessages in config.ini Errors generated by overridden valuesHow to Upgrade Firmware File TransfersFirmware File Transfer Methods Benefits of upgrading firmwareUsing the Firmware Upgrade Utility Use FTP or SCP to upgrade one Rack PDUUse Xmodem to upgrade one Rack PDU How to upgrade multiple Rack PDUs Using the Firmware Upgrade Utility for multiple upgradesUsing a USB flash drive to upgrade one Rack PDU Firmware Module Binary File Verifying Upgrades and Updates Verify the version numbers of installed firmwareVerify the success or failure of the transfer Last Transfer Result codesTroubleshooting Rack PDU Access ProblemsProblem Solution Appendix a List of Supported Commands Network Management Card Command DescriptionsSets manual IPv6 address Device Command Descriptions APC Worldwide Customer Support 990-3429D-001 10/2012

AP8886, AP88XX, AP8861 specifications

The APC AP8861, part of the AP88XX series, is a highly versatile and advanced power distribution unit (PDU) designed to meet the growing demands of data centers and IT environments. This series encompasses state-of-the-art technologies and features designed to enhance both operational efficiency and reliability.

The AP8861 model is particularly recognized for its modular design, allowing for easy scaling and expansion as data center needs evolve. With a variety of outlet configurations, it can accommodate numerous devices while optimizing power management. The device supports both standard and high-density power distribution, making it suitable for diverse environments, from small server rooms to large-scale data centers.

One of the hallmark features of the AP8861 is its built-in network management capabilities. It allows for real-time monitoring of power consumption, ensuring optimal load balancing and helping prevent overload situations. The device incorporates environmental monitoring through temperature and humidity sensors, enabling administrators to proactively manage operating conditions and mitigate risks to sensitive equipment.

The AP88XX series features advanced Surge Protection, which guards against electrical surges that can damage connected equipment. This is a critical consideration in data centers where the integrity of sensitive electronics is paramount. Additionally, the series supports remote management, allowing IT personnel to monitor and control power distribution from anywhere in the world. This function enhances operational flexibility and facilitates rapid responses to power-related issues.

Another significant characteristic of the AP8861 is its compatibility with APC's software solutions. Integrating seamlessly with IT management platforms enables deeper insights and analytics, leading to informed decision-making regarding power usage and equipment reliability.

The device boasts a high-efficiency design, contributing to reducing overall energy costs. The capability to customize alarm settings for power events and environmental factors further enhances proactive management of the data center environment.

In summary, the APC AP8861 and the entire AP88XX series are engineered for robust performance, enhanced control, and adaptability in power distribution management. Packed with advanced features, this series offers solutions that help businesses optimize their data centers while ensuring maximum uptime and equipment protection, thereby supporting the ever-increasing demands placed on modern IT infrastructures.
Top Page Image Contents