APC AP8861, AP8886, AP88XX manual Option 43 = 01 04 31 41 50

Page 14

When the Rack PDU reboots, the BOOTP server provides it with the TCP/IP settings.

•If you specified a bootup file name, the Rack PDU attempts to transfer that file from the BOOTP server using TFTP or FTP. The Rack PDU assumes all settings specified in the bootup file.

•If you did not specify a bootup file name, you can configure the other settings of the Rack PDU remotely through its “Web Interface” on page 40 or “Command Line Interface” on page 7; the user name and password are both apc, by default. To create a bootup file, see your BOOTP server documentation.

DHCP. You can use an RFC2131/RFC2132-compliant DHCP server to configure the TCP/IP settings for the Rack PDU.

This section summarizes the Rack PDU’s communication with a DHCP server. For more detail about how a DHCP server can configure the network settings for a Rack PDU, see “DHCP response options” on page 60.

1.The Rack PDU sends out a DHCP request that uses the following to identify itself:

–A Vendor Class Identifier (APC by default)

–A Client Identifier (by default, the MAC address of the Rack PDU)

–A User Class Identifier (by default, the identification of the application firmware installed on the Rack PDU)

–A Host Name (by default, apcXXYYZZ with XXYYZZ being the last six digits of the PDU). This is known as DHCP Option 12.

2.A properly configured DHCP server responds with a DHCP offer that includes all the settings that the Rack PDU needs for network communication. The DHCP offer also includes the Vendor Specific Information option (DHCP option 43). The Rack PDU can be configured to ignore DHCP offers that do not encapsulate the APC cookie in DHCP option 43 using the following hexadecimal format. (The Rack PDU does not require this cookie by default.)

Option 43 = 01 04 31 41 50 43

Where:

–The first byte (01) is the code.

–The second byte (04) is the length.

–The remaining bytes (31 41 50 43) are the APC cookie.

See your DHCP server documentation to add code to the Vendor Specific Information option.

Note: By selecting the Require vendor specific cookie to accept DHCP Address check box in the Web interface, you can require the DHCP server to provide an “APC” cookie, which supplies information to the Rack PDU: Administration > Network>TCP/IP>ipv4 settings.

Metered Rack PDU User Guide

6

Page 13 Page 15
Image 14
Page 13 Page 15
Contents User Guide Contents Log on to the Command Line Interface Web Interface Logs Administration Notification Device IP Configuration Wizard Troubleshooting Product Features IntroductionAccess Priorities for Logging on Types of User AccountsWatchdog Features Network Port SharingGetting Started Dhcp and Bootp configuration Establish Network SettingsTCP/IP configuration methods INI file utilityOption 43 = 01 04 31 41 50 Command Line Interface Recovering from a Lost Password Rack PDU Front Panel FunctionFunction Display Tree Example Display Tree Example Condition Description Load indicator LEDNetwork Status LED 10/100 LEDLog on to the Command Line Interface Command Line InterfaceAbout the Command Line Interface Remote access to the command line interfaceLocal access to the command line interface About the Main ScreenUsing the Command Line Interface IPv4 IPv6 Description OnlyCommand Syntax DescriptionCommand Response Codes Code MessageAbout Network Management Card Command DescriptionsAlarmcount Option Arguments DescriptionClrrst BootOption Argument Description Console Argument Description DateDelete DirExit DnsEventlog FormatNetstat Option Argument DefinitionHelp NtpPrompt PingPortSpeed QuitReboot RadiusSystem ResetToDefSnmp, snmpv3 Tcpip Tcpip6User WebXferINI XferStatusBkLowLoad Device Command DescriptionsNetwork Port Sharing Commands BkNearOverDevLowLoad BkOverLoadBkReading DevReading DevNearOverDevOverLoad Argument DefinitionHumReading HumLowHumMin PhOverLoad PhLowLoadPhNearOver PhReading ProdInfo SensorNameTempReading TempHighTempMax Whoami Logging On to the Web Interface Web InterfaceSupported Web Browsers Error Message Browser Cause of the Error URL address formatsTabs Web Interface FeaturesSymbol Description Device status iconsOther Web interface features Quick LinksGroup Control using Network Port Sharing Network Port Sharing on the Web InterfaceMetered Rack PDU User Guide Overview view Alarm Status viewAbout the Home Tab About the Device Manager Tab Configuring Load ThresholdsDevice Management Viewing the Load Status and Peak LoadConfigure the Name and Location of the Rack PDU Resetting Peak Load and kWhConfigure Temperature and Humidity Sensors EnvironmentEvent log LogsUse the Event and Data Logs Example event log Rack PDU 4 Device low load Data log Path Logs Data optionsParameter Description How to use FTP or SCP to retrieve log files Scp username@hostnameoripaddressdata.txt ./data.txtAuthentication Administration SecuritySetting user access Local UsersRadius Setting Definition RadiusConfiguring a Radius server on Unix with shadow passwords Configure the Radius ServerSummary of the configuration procedure Supported Radius serversInactivity Timeout TCP/IP settings Administration Network FeaturesTCP/IP and Communication Settings Setting DescriptionDhcp response options APC Cookie. Tag 1, Len 4, Data 1APCPort Speed Ping ResponseDNS Query Type Selected Query Question to UseStatus WebOption Description Console Telnet 152.214.12.1145000 telnet 152.214.12.114Snmp SNMPv1 SNMPv3 FTP Server Event Actions Administration NotificationConfiguring event actions Types of notificationMetered Rack PDU User Guide Active, Automatic, Direct Notification Mail notificationSend a test message to a configured recipient Snmp traps Snmp Trap TestSyslog Remote Monitoring ServiceSetting Definition Informational is mapped to Info Set the Date and Time Administration General OptionsIdentification ModeUse an .ini File Daylight savingChange the default temperature scale Event Log and Temperature UnitsReset the Rack PDU Color-code event log textConfigure Links About the Rack PDUUse the Wizard Device IP Configuration WizardCapabilities, Requirements, and Installation Select Locally through the serial port, and click Next Configure or reconfigure the TCP/IP settings locallySelect Remotely over the network, and click Next Contents of the .ini file How to Export Configuration SettingsSummary of the procedure Retrieving and Exporting the .ini FileDetailed procedures Ftp open ipaddress Messages in config.ini Upload Event and Error MessagesEvent and its error messages Errors generated by overridden valuesFirmware File Transfer Methods How to Upgrade FirmwareFile Transfers Benefits of upgrading firmwareUsing the Firmware Upgrade Utility Use FTP or SCP to upgrade one Rack PDUUse Xmodem to upgrade one Rack PDU Using a USB flash drive to upgrade one Rack PDU How to upgrade multiple Rack PDUsUsing the Firmware Upgrade Utility for multiple upgrades Firmware Module Binary File Verify the success or failure of the transfer Verifying Upgrades and UpdatesVerify the version numbers of installed firmware Last Transfer Result codesProblem Solution TroubleshootingRack PDU Access Problems Appendix a List of Supported Commands Network Management Card Command DescriptionsSets manual IPv6 address Device Command Descriptions APC Worldwide Customer Support 990-3429D-001 10/2012

AP8886, AP88XX, AP8861 specifications

The APC AP8861, part of the AP88XX series, is a highly versatile and advanced power distribution unit (PDU) designed to meet the growing demands of data centers and IT environments. This series encompasses state-of-the-art technologies and features designed to enhance both operational efficiency and reliability.

The AP8861 model is particularly recognized for its modular design, allowing for easy scaling and expansion as data center needs evolve. With a variety of outlet configurations, it can accommodate numerous devices while optimizing power management. The device supports both standard and high-density power distribution, making it suitable for diverse environments, from small server rooms to large-scale data centers.

One of the hallmark features of the AP8861 is its built-in network management capabilities. It allows for real-time monitoring of power consumption, ensuring optimal load balancing and helping prevent overload situations. The device incorporates environmental monitoring through temperature and humidity sensors, enabling administrators to proactively manage operating conditions and mitigate risks to sensitive equipment.

The AP88XX series features advanced Surge Protection, which guards against electrical surges that can damage connected equipment. This is a critical consideration in data centers where the integrity of sensitive electronics is paramount. Additionally, the series supports remote management, allowing IT personnel to monitor and control power distribution from anywhere in the world. This function enhances operational flexibility and facilitates rapid responses to power-related issues.

Another significant characteristic of the AP8861 is its compatibility with APC's software solutions. Integrating seamlessly with IT management platforms enables deeper insights and analytics, leading to informed decision-making regarding power usage and equipment reliability.

The device boasts a high-efficiency design, contributing to reducing overall energy costs. The capability to customize alarm settings for power events and environmental factors further enhances proactive management of the data center environment.

In summary, the APC AP8861 and the entire AP88XX series are engineered for robust performance, enhanced control, and adaptability in power distribution management. Packed with advanced features, this series offers solutions that help businesses optimize their data centers while ensuring maximum uptime and equipment protection, thereby supporting the ever-increasing demands placed on modern IT infrastructures.
Top Page Image Contents