NETGEAR XS712T manual Switch Integrity, Autonegotiation

Page 24

XS712T Smart Switch

that cable distances, repeater limits, and other physical aspects of the installation do not exceed the Ethernet limitations.

Switch Integrity

If necessary, verify the integrity of the switch by resetting the switch. To reset the switch, remove the AC power from the switch and then reapply AC power. If the problem continues, contact NETGEAR technical support. In North America, call 1-888-NETGEAR. If you are outside of North America, refer to the support information card included with your product.

Autonegotiation

The RJ-45 ports negotiate the correct duplex mode, speed, and flow control if the device at the other end of the link supports autonegotiation. If the device does not support autonegotiation, the switch determines only the speed correctly, and the duplex mode defaults to half-duplex.

24

Image 24

Contents XS712T Smart Switch Support TrademarksRevision History Contents Appendix C Notification of Compliance Introduction Features OverviewPackage Contents XS712T Smart Switch Physical Description Front Panel and Back Panel Configuration LED DesignationsDevice Hardware Interfaces Port LEDsSystem LEDs Reset Button Factory Defaults ButtonRJ-45 Ports SFP+ PortsApplications Desktop Switching Backbone SwitchingBackbone switching Installation Install the Switch Install the Switch on a Flat Surface To install the switch on a flat surface Prepare the SiteCheck the Installation Connect Devices to the SwitchInstall the Switch in a Rack  To install the switch in a rackInstall an SFP Transceiver Module  To connect devices to the switch To install an SFP transceiver Apply AC Power  To apply AC powerXS712T Smart Switch Troubleshooting Troubleshooting Chart Additional Troubleshooting SuggestionsConfiguration Network Adapter CardsSwitch Integrity AutonegotiationTechnical Specifications Network Protocol and Standards Compatibility ManagementPerformance Specifications Power SupplyPhysical Specifications Environmental SpecificationsSafety Netgear Wired Products Regulatory Compliance InformationEurope EU Declaration of Conformity FCC Requirements for Operation in the United StatesXS712T Smart Switch FCC Guidelines for Human Exposure