D-Link DSL-1500G Adding and Changing Connection Profiles, Connection Profile menu, Profile Name

Page 29

DSL-1500G SHDSL Ethernet Router User’s Guide

Adding and Changing Connection Profiles

Use the Connection Profile menu to add new profiles or change existing profiles. Creating a new connection profile is necessary if your DSL service uses protocols that are not offered through the default Router/Bridge Configuration menu. If it is necessary to change the PVC settings (the VPI and VCI values) for the DSL connection, this is done using the Connection Profile menu. Do not change the VPI or VCI values unless you receive explicit instructions to do so from your service provider. When a new connection profile is created it is necessary to save the new profile and reboot the device before it can be selected in the Configuration menu.

To create a new Connection Profile: click any hyperlinked index number for an undefined profile from the list, a new menu appears (see below).

To change an existing Connection Profile: click the hyperlinked index number the listed profile, a new menu appears (see below).

NOTE: Connection profiles additions and changes must be saved and the device must be rebooted before it can be used in the Router/Bridge Configuration menu.

Connection Profile menu

The Connection Profile menu lists existing profiles. To change an existing profile click on the number for that profile, the menu will appear. To add a new profile, click on an unused number to see the Connection Profile Configuration menu. A profile may be deleted by clicking on the Delete button for that profile. If a profile is deleted, this change must be saved or the configuration will remain in the non-volatile RAM of the Router.

The information displayed in the Connection Profile list is described below.

 

Profile Name

The name of the listed connection profile. Profile names may be up to 16

 

characters long with no spaces.

 

 

 

VPI

This is the Virtual Path Identifier for the profile. This is used to direct

 

data along a dedicated path on the ATM network backbone.

 

 

 

 

This is the Virtual Circuit Identifier for the profile. This is used to direct

 

VCI

data along a dedicated circuit within the listed VPI on the ATM network

 

 

backbone.

 

Connection Type

This is the protocol used (PPPoA, PPPoE, RFC 1483 or IPoA) and

 

device type (Router or Bridge) configured for the profile.

 

 

 

 

 

 

 

 

19

 

Image 29
Contents User’s Guide Wichtige Sicherheitshinweise Link Offices for Registration and Warranty Service Limited WarrantyHardware SoftwareFCC Warning TrademarksCopyright Statement Table of Contents Technical Specifications Guide Overview Before You StartInstallation Overview Requirements for InstallationOperating System Web BrowserPacking List Account Information User Name and PasswordPage About Shdsl Router Description and OperationProduct Features Standards Compatibility and Compliance Front Panel LED Display PowerStatus EthernetRear Panel Cable Connections Factory Reset Button Power On RouterConnect Router to Ethernet Select LocationWan Configuration Summary Configure IP Settings on Your ComputerConfigure Dhcp for Windows 2000/XP Configure Dhcp for Windows 95/98/MeDhcp Configuration for Windows NT Renew IP Settings in Windows for Dhcp ClientLogin Access the Configuration ManagerEnter User Name and Password Configuring the WAN Connection First Time Setup Configure the RouterRouter/Bridge Configuration Bridge with RFC 1483 only Web-based Management Guide Accessing the Web ManagerWeb Manager GUI Web Manager Folders Menus Web Manager LayoutRouter/Bridge Configuration Router ConfigurationRouter/Bridge Configuration Login Password All connections must configureConfirm Password AuthenticationConnect / Disconnect Buttons Bridge ConfigurationBridge with RFC 1483 Router/Bridge Configuration menu Router with IPoA Router/Bridge Configuration menu IPoA ConfigurationConnection Profile menu Adding and Changing Connection ProfilesProfile Name Connection TypeAdd/Change Connection Profile DSL-1500G Shdsl Ethernet Router User’s Guide Ethernet IP Address Menu Configuring LAN IP SettingsProxy DNS Menu Proxy DNS SettingsProxy DNS Get DNS IP automaticallyDhcp Configuration NAT Configuration Menu NAT ConfigurationIP Masquerade Pass Through IP Masquerade Timer IP Masquerade TimerPort Redirection Menu Port RedirectionProtocol Select index to setInternet Start PortStatic Route Configuration Table Static Route ConfigurationItem Name GatewayFilter & Firewall Main Menu Advanced Filter & FirewallDestination Pass or BlockSource RIP Menu RIPDate & Time Configuration Date & Time SettingsUPnP UPnP ConfigurationATM Loopback Screen System MaintenanceATM Loopback Test F4/F5System User Name and Password Menu System Username and PasswordSave Changes Save Changes MenuUpdate Firmware Factory ResetFactory Reset Screen Update Firmware ScreenRemote Administration Access Configuration File MaintenanceConfiguration Maintenance Screen Remote Administration AccessConnection Status Shdsl Line SettingLine Retrain System Summary SummaryPPP Login Information Login User Name ConfigurationDhcp Configuration NAT ConfigurationPort Redirection Summary Dhcp Allocation TableDhcp Allocation Table Port Redirection SummaryFilter and Firewall Summary Runtime Routing TableRuntime Routing Table Filtering & Firewall SummaryLine Condition Dimensions TemperatureWeight SafetyIPv4 ATM/DSLPage Offices Netherlands Link Benelux Print, type or use block letters Registration Card