D-Link DSL-1500G manual Add/Change Connection Profile

DSL-1500G SHDSL Ethernet Router User’s Guide

Clicking the index number of an existing profile or the index number of an undefined profile brings up the Connection Profile Configuration menu:

Add/Change Connection Profile

NOTE: The VPI and VCI numbers are assigned by the network service provider. These values should not be changed unless you are instructed to do so. Incorrect VPI or VCI settings will not allow the device to connect to the WAN.

To add a new profile or change an existing one, change the following parameters:

Profile Name	Type in a new name for this profile.
VPI	Type in the new VPI setting (0-255) if this needs to be changed.
VCI	Type in the new VCI setting (32-65535) if this needs to be changed.
Connection Type	From the drop-down menu, select an encapsulation option: Router with
	PPPoA, Router with PPPoE, Router with IPoA or Bridge with RFC 1483.

When all the changes have been made, click on the OK button. You will be prompted to save the changes and reboot the device in a new window:

20