DSL-1500G SHDSL Ethernet Router User’s Guide
DHCP Configuration
Us e the DHCP Configuration on LAN menu to configure the Router to act as a DHCP server for the LAN.
|
| DHCP Configuration Menu |
| Configure LAN DHCP services by defining the following parameters: | |
|
|
|
| Start IP Address | Type in the base address for the IP pool of unassigned IP addresses. |
|
|
|
| End IP Address | Type in the last address of the contiguous IP address range to be used by |
| the Router for DHCP function. | |
|
| |
|
|
|
| Netmask | Type in a subnet mask IP address. |
|
|
|
| Default Gateway | Type in the Default Gateway IP Address that will be assigned to and used |
| by the DHCP clients. | |
|
| |
|
|
|
| Leased Time | This specifies the amount of time (in hours) a client can lease an IP |
| address, from the dynamically allocated IP pool. | |
|
| |
|
|
|
| Primary DNS | Enter any Internet DNS server IP address available through the WAN |
| connection or use the DNS settings supplied by your service provider. | |
|
| |
|
|
|
| Secondary DNS | Enter a backup DNS IP address or leave blank. |
|
|
|
| Primary WINS | Some LANs may require using WINS servers, enter the IP address of the |
| WINS server or leave blank. | |
|
| |
|
|
|
| Secondary WINS | Enter a |
|
|
|
| Domain Name | Enter a domain name for the network group or leave blank. |
|
|
|
| State | Default = enabled. If you wish to disable the DHCP function, select disabled |
| from the | |
|
| |
|
|
|
|
|
|
|
| 24 |