NETGEAR JWNR2000v5 Reboot the Router, Manage the Configuration File,  To reboot the router

Page 61

N150 and N300 Wireless Routers

•Broadcast Name. Indicates whether the router is broadcasting its SSID for the guest network.

•Wireless Isolation. Indicates whether wireless isolation is on or off for the guest network. When it is off, wireless clients (computers or wireless devices) that join the guest network can use the Internet, but cannot access each other or access Ethernet devices on the network.

•Allow guest to access My Local Network. Indicates whether wireless clients on the guest network can access your local network, instead of only the Internet and other wireless clients on the guest network.

Reboot the Router

To reboot the router:

1.Launch a web browser from a computer or wireless device that is connected to the network.

2.Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

3.Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

4.Click the ADVANCED tab.

5.In the Router Information pane, click the Reboot button.

6.Click OK to confirm. The router reboots.

WARNING:

Do not interrupt the reboot process.

Manage the Configuration File

The configuration settings of the router are stored within the router in a configuration file. You can back up (save) this file to your computer, restore it, or reset it to the factory default settings.

Manage Your Network

61

Image 61

Contents Models N150 and N300 Wireless RoutersCompliance SupportTrademarks Contents Manage Your Network Appendix a Supplemental Information Hardware Setup Front Panel LEDs Hardware FeaturesBack Panel Position Your Router  To prepare your router for installation To position your router  To cable your router Cable Your RouterVerify the Cabling Connect to the Network Access the Router WiFi Connection Wired Connection To use WPS to connect to the WiFi network  To find and select the WiFi networkUse a Web Browser to Access the Router Types of LoginsNetgear genie Automatic Internet Setup Log In to the Router  To use Netgear genie to set up your router To log in to the router Connect to the Network and Access the Router Specify Your Internet Settings  To use the Setup Wizard Use the Internet Setup WizardSelect Advanced Setup Wizard Specify an Internet Connection Without a Login Manually Set Up the Internet Connection To specify the Internet connection settings  To view or change the basic Internet setup Specify an Internet Connection That Uses a LoginSelect Internet Change the MTU Size  To change the MTU size Select Advanced Setup WAN SetupCommon MTU sizes Networking  To view or change the WAN settings View or Change WAN SettingsSet Up a Default DMZ Server Change the Router’s Device Name  To set up a default DMZ server To change the router’s device name Select Advanced Setup LAN Setup Change the LAN TCP/IP Settings To change the LAN TCP/IP settings LAN IP addressRIP Version list, select one of the following Specify the IP Addresses that the Router Assigns  To disable the Dhcp server feature in the router Disable the Dhcp Server Feature in the RouterReserve LAN IP Addresses  To edit a reserved address entry  To reserve an IP address To delete a reserved address entry Use the WPS Wizard for WiFi Connections To use the WPS Wizard Select Advanced WPS Wizard To specify basic wireless settings Specify Basic WiFi SettingsSelect Wireless  To change the WPA settings Change the WiFi Security Option To set up a guest network Set Up a Guest NetworkSelect Guest Network Enable or Disable the Wireless Radio Control the Wireless Radio To enable or disable the wireless radio Select Advanced Advanced Setup Wireless Settings Set Up a Wireless Schedule To set up the wireless schedule Set up a Wireless Access List Networking Wireless Distribution System Specify WPS Settings To specify WPS Settings  To set up the base station Set Up the Base StationSelect Advanced Advanced Setup Wireless Repeating Function Select the Enable Wireless Repeating Function check box Set Up a Repeater To configure the router as a repeater Complete the Repeater IP Address field Select Advanced Advanced Setup Static Routes  To set up a static routeStatic Routes  To edit a static route  To delete a static route View Devices Currently on the Network To view devices on the network Improve Network Connections with Universal Plug and Play  To enable Universal Plug and PlaySelect Attached Devices Select Advanced Advanced Setup UPnP Manage Your Network  To check for new firmware and update your router Update the Router FirmwareSelect Advanced Administration Firmware Update Recover the admin Password Change the admin Password To set the password for the user name admin Select Advanced Administration Set Password To recover your password Select the Enable Password Recovery check box To view router status and usage information View Router StatusClick the Advanced tab LAN Port To view the Internet connection settings View the Internet Connection SettingsDisplay Internet Port Statistics  To display Internet port statistics To check the Internet connection status View the Internet Connection StatusDhcp Connection  To change the router Dhcp connection settings To change the router PPPoE connection settings View Wireless Settings To change the router Pptp connection settings  To view the wireless settings To view the guest network settings View Guest Network SettingsManage the Configuration File Reboot the Router To reboot the router Do not interrupt the reboot processRestore Configuration Settings Back Up Settings To back up the router’s configuration settings Select Advanced Administration Backup SettingsErase Configuration Settings Troubleshooting Admin Password Forgotten PasswordsWiFi Passwords  To use a wired connection to view WiFi settings WiFi Connections To apply power to the router and check the LEDs Apply Power to the Router and Check the LEDsChanges Not Saved Troubleshoot with the LEDsPower LED Stays Amber Power LED Is Off or BlinkingAll LEDs Remain Lit Internet LEDs Is OffCannot Log In to the Router WiFi LED Is Off To check the WAN IP address Router Cannot Access the InternetTroubleshoot a PPPoE Internet Connection Troubleshoot Internet Browsing To troubleshoot a PPPoE Internet connection Test the LAN Path to Your Router Troubleshoot Your Network Using the Ping Utility To ping the router from a computer running Windows Request timed out Test the Path from Your Computer to a Remote DeviceTroubleshoot IP Addresses Supplemental Information Router factory default settings Factory SettingsRouter specifications Technical Specifications

Related manuals

Manual 91 pages 45.66 Kb