Asante Technologies 1012 manual Configuration Menu System

Configuration Menu System

❏Status enables or disables the filtering function for this range of addresses.

To use the Bridge Filtering Table, do the following:

1	Use the arrow keys to highlight the LO DST address field
	and press return.
	The current value in the field is displayed in the data entry
	bar at the bottom of the window.
2	Enter control-uto clear the entry bar and enter the new
	lower range limit for packet destination addresses for this

parameter set.

Press return when the entry is correct.

3

4

Select the HI DST address field and press return.

Enter the new upper range limit for packet destination addresses for the parameter set.

Press return when the entry is correct.

5	Select the LO SRC Address field and enter a new lower
	range limit for packet source addresses.
	Press return when the entry is correct.
6	Select the HI SRC Address field and enter a new upper
	range limit for packet destination addresses.
	Press return when the entry is correct.
7	Select the LO Type field and define the lower range limit
	for packet types (protocols).
8	Select the HI Type field and define the upper range limit for
	packet types.
9	Select the Status field and use the spacebar to toggle it
	ON or OFF.

10 Repeattable. steps 1-9for each additional parameter set in the

Page 3-35