Chapter 3 — AsantéBridge 1012 Local Management
Resetting the Bridge | You can reset the AsantéBridge 1012 in three different ways: |
| ❏ Cycle the power.This resets both the bridge and hub |
| portions of the device.The repeater is not affected. |
| ❏ Push the Reset button on the front panel.This resets |
| both hub and bridge. |
| ❏ Send the Reset system command from the Configura- |
| tion Menu.This resets both the bridge and the hub. |
Figure 3-21 Resetting the Bridge
1
2
Use the arrow keys to select the Reset system command.
Press return to reset the bridge.
Confirmation is required.The command executes only after you have confirmed your choice.
Your display will begin to cycle through the bridge power- on diagnostics and return to the Local Management Menu.
3 Enter
Remember that a reset:
❏Resets the bridge and hub statistics counters to zero
❏Erases any packets in bridge and hub memory at the time of the reset
❏Prevents the bridge from forwarding or filtering data flow until the
❏Erases dynamic forwarding addresses
Page