NETGEAR WN3100RP manual Install the Extender, Place the Extender and Power It On

Page 14

Universal Pass Through WiFi Range Extender WN3100RP

•Make sure that your Ethernet cable is securely connected to the extender and to the computer. If the cable is not securely connected, reconnect the Ethernet cable and relaunch your Internet browser.

Install the Extender

Place the extender, apply power, and connect it to your WiFi network.

Place the Extender and Power It On

1.Place the extender halfway between your router or gateway and the location that has poor WiFi coverage.

If it is not possible to place the extender at the halfway point, move the extender closer to the location with poor coverage, but still within the wireless range of the router or gateway.

2.Turn the On/Off switch on the side of the extender to the On position.

On/Off switch

3.Plug the extender into a power outlet and wait one minute until the extender starts.

The Power LED lights green.

4.Connect the extender to your WiFi network.

a.Connect the extender to your router or gateway.

For more information, see Connect the Extender to Your WiFi Network on page 15.

b.Connect your clients to your extender.

For more information, see Join the Extender WiFi Network on page 16.

Getting Started

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Universal Pass Through WiFi Range Extender WN3100RP August 2013 East Plumeria Drive San Jose, CASupport Table of Contents Appendix a Supplemental Information Getting Started Get to Know the Extender How the Extender WorksWhen to Use Your Extender Find the Best LocationUse the Pass-Through Power Socket Pass-through power socket useHardware Features Front and Right Side ViewUniversal Pass Through WiFi Range Extender WN3100RP Rear and Left Side View Rear and left side viewAntennas Extender Port ConnectionEthernet port connection Install the Extender Place the Extender and Power It On To connect with the web browser method Connect the Extender to Your WiFi Network To connect using WPS New Extender WiFi Network Name Join the Extender WiFi Network To log in to the extender Log In to the ExtenderMonitor Extender Performance Use the Smart Wizard to Change the Settings  To use the Smart Wizard again after installationUniversal Pass Through WiFi Range Extender WN3100RP When You Travel  To connect the extender with WiFi Restore Factory Settings  To restore the factory settingsExtender Network Settings Connect the Extender to an Existing Network Use WPS to Add a Computer to the Extender’s Wireless Network Universal Pass Through WiFi Range Extender WN3100RP Extender Wireless Settings Universal Pass Through WiFi Range Extender WN3100RP Set Up WEP Select Setup Wireless SettingsExtender IP Address Setup Set Up WPA, WPA2, or WPA + WPA2Connection status to Existing Network  To view the Status screen Select Maintenance StatusStatus Screen  To view the statistics of your connections Extender Wireless SettingsExtender IP Info Attached Devices Field DescriptionBack Up and Manage Extender Settings Set the Password Update the Firmware Advanced Wireless Settings Universal Pass Through WiFi Range Extender WN3100RP Troubleshooting Smart Wizard FAQs Connecting to http//mywifiext.netJoining Wireless Networks Connection was not established to the selected networkSupplemental Information Factory Settings Technical SpecificationsSafety Information Universal Pass Through WiFi Range Extender WN3100RP Netgear wireless powerline products Notification of ComplianceRegulatory Compliance Information
Related manuals
Manual 20 pages 11.49 Kb
Top Page Image Contents