Universal Pass Through WiFi Range Extender WN3100RP
Under some circumstances (for example, if you have lost track of the changes that you made to the extender settings), you might want to erase the configuration. After an erase, the extender returns to its factory settings (see Factory Settings on page 43).
CAUTION:
Do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting!
Set the Password
The user name to access the extender is admin, and its default password is password. NETGEAR strongly recommends that you set a more secure password.
To set your password:
1.Select Maintenance > Set Password. The following screen displays:
2.Type the old password, and then type the new password twice.
3.To enable password recovery, select the Enable Password Recovery check box.
Extender Network Settings
35