NETGEAR WN3100RP manual Joining Wireless Networks

Page 41

Universal Pass Through WiFi Range Extender WN3100RP

•Amber indicates a workable performance.

• Red indicates a poor connection or no connection.

If you cannot get a wireless connection working, you can use an Ethernet cable to connect your computer to the extender. See Extender Port Connection on page 12.

Joining Wireless Networks

To join a wireless network you must know its network name (also called the SSID) so that you can select it. If the network is secure, you must know the passphrase or wireless key. If the extender does not connect to the network that you chose, the following message displays:

Connection was not established to the selected network.

If this happens it could be for one of these reasons:

•The network name, passphrase, or key might have been typed incorrectly. Click the Cancel button, use the Smart Wizard to select the network from the list, and retype the passphrase or key. This is case-sensitive. PASSWORD25 is not the same as Password25 or password25. See Use the Smart Wizard to Change the Settings on page 18.

•If the Smart Wizard does not find your wireless network (it is not displayed in the Select the name of your existing network screen), check to see that the wireless network is still working properly. Make sure that the router or gateway is turned on. If possible, move the extender closer to the router or gateway and click the Try Again button.

•If the Router Link LED is red, this indicates a poor wireless connection. The best connection is established when there is a clear line of sight between the extender and the router or gateway you are connecting to. Make sure that there are no physical obstacles between the extender and the router or gateway, and try to move the extender closer to the router or gateway.

If you use the Smart Wizard, and the extender cannot connect to the router or gateway or cannot get an IP address from the router or gateway, it displays the following message:

You are not able to connect to the Internet. Click Continue to run through set up again to connect to your network.

If you click the Continue button, the Smart Wizard starts again (see Use the Smart Wizard to Change the Settings on page 18). If you click the Exit button, the Status screen displays with menu selections on the left (see Log In to the Extender on page 17).

Troubleshooting

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents August 2013 East Plumeria Drive San Jose, CA Universal Pass Through WiFi Range Extender WN3100RPSupport Table of Contents Appendix a Supplemental Information Getting Started How the Extender Works Get to Know the ExtenderFind the Best Location When to Use Your ExtenderPass-through power socket use Use the Pass-Through Power SocketFront and Right Side View Hardware FeaturesUniversal Pass Through WiFi Range Extender WN3100RP Rear and left side view Rear and Left Side ViewExtender Port Connection AntennasEthernet port connection Place the Extender and Power It On Install the Extender To connect with the web browser method Connect the Extender to Your WiFi Network To connect using WPS Join the Extender WiFi Network New Extender WiFi Network Name To log in to the extender Log In to the ExtenderMonitor Extender Performance  To use the Smart Wizard again after installation Use the Smart Wizard to Change the SettingsUniversal Pass Through WiFi Range Extender WN3100RP When You Travel  To connect the extender with WiFi  To restore the factory settings Restore Factory SettingsExtender Network Settings Connect the Extender to an Existing Network Use WPS to Add a Computer to the Extender’s Wireless Network Universal Pass Through WiFi Range Extender WN3100RP Extender Wireless Settings Universal Pass Through WiFi Range Extender WN3100RP Select Setup Wireless Settings Set Up WEPSet Up WPA, WPA2, or WPA + WPA2 Extender IP Address SetupConnection status to Existing Network  To view the Status screen Select Maintenance StatusStatus Screen  To view the statistics of your connections Extender Wireless SettingsExtender IP Info Field Description Attached DevicesBack Up and Manage Extender Settings Set the Password Update the Firmware Advanced Wireless Settings Universal Pass Through WiFi Range Extender WN3100RP Troubleshooting Connecting to http//mywifiext.net Smart Wizard FAQsConnection was not established to the selected network Joining Wireless NetworksSupplemental Information Technical Specifications Factory SettingsSafety Information Universal Pass Through WiFi Range Extender WN3100RP Notification of Compliance Netgear wireless powerline productsRegulatory Compliance Information
Related manuals
Manual 20 pages 11.49 Kb

WN3100RP specifications

The NETGEAR WN3100RP is a versatile Wi-Fi range extender designed to enhance and expand the wireless coverage of your home or office network. As devices increasingly rely on a stable and robust internet connection, the WN3100RP steps up by providing a solution to dead zones and weak signal areas. With a sleek design and user-friendly setup, it offers a range of features that make it a popular choice for consumers looking to improve their Wi-Fi experience.

One of the standout features of the WN3100RP is its dual-band capability, operating simultaneously on both the 2.4GHz and 5GHz frequency bands. This dual-band functionality ensures that users can enjoy faster speeds with reduced interference, leading to better streaming, gaming, and browsing experiences. The device supports speeds of up to 750 Mbps, making it suitable for high-bandwidth activities, including HD video streaming and online gaming.

The WN3100RP also boasts Push 'N' Connect technology through the WPS (Wi-Fi Protected Setup) button, allowing for quick and secure connections to your existing router. This feature simplifies the setup process, enabling users to extend their Wi-Fi network without needing to enter lengthy passwords. Additionally, the extender is equipped with external antennas that further enhance signal strength and coverage.

Security is a priority with the WN3100RP, as it supports WEP, WPA, and WPA2 protocols, ensuring that your network remains secure from unauthorized access. This level of security is essential for maintaining privacy and safeguarding personal data in today's digital age.

The device is compatible with any standard Wi-Fi router, making it a flexible option for various networking environments. Its compact design allows it to blend seamlessly into home or office settings while being easily movable for optimal placement. Setup and management are also simplified through the NETGEAR genie app, providing users with quick access to network controls and settings from any mobile device.

In summary, the NETGEAR WN3100RP is an effective solution for anyone looking to extend their Wi-Fi range. Its combination of dual-band technology, high-speed capabilities, secure connectivity, and ease of use makes it a valuable addition to any wireless network, effectively bridging the gap between devices and their internet connection. With the rise of smart home devices and increased demand for reliable internet, the WN3100RP stands out as a reliable choice for enhancing home networking capabilities.
Top Page Image Contents